Main application fields of medical high and low temperature circulation device

The medical high and low temperature circulation device is an all-in-one machine that can perform both heating and cooling operations.
It uses a fully enclosed pipeline design and a plate heat exchanger, while reducing the demand for heat transfer fluid and improving the thermal energy utilization of the system.
Achieving a rapid increase in temperature
.


The medical high and low temperature circulation device is currently a commonly used equipment in the pharmaceutical chemical industry, laboratories, universities and other industries.
The entire system is a fully closed system.
The system will not increase the pressure due to high temperature during operation, and the low temperature automatically replenishes the heat transfer medium
.

Wide temperature range, excellent performance, intelligent temperature control, temperature selection and temperature setting will be carried out according to user needs, and return to the set temperature within the specified time range
.

However, if it is operated for a long time or the total operation is improper, the cooling of the equipment will be slowed down.
Therefore, it is necessary to discuss this situation
.

1.
In the process of use, the operator will often act too hastily.
When the machine is just running, the machine will be turned to a larger value.
In fact, this approach is often counterproductive.
The machine is in a shutdown state, and suddenly Enlarge the stirring impeller for material reaction, which will cause the operating burden of the body.
Based on this situation, the agitator can easily reverse.
If the body does not reverse at the time, it will cause the agitator to deform
.

In addition to deformation, it will also cause the body temperature to rise rapidly and destroy the mechanical properties
.

　　2.
During long-term operation, it is also reasonable for the temperature of the kettle body to rise, but it is afraid that the temperature rises to the rated temperature, which will affect the reaction of the material at that time.
In this case, the installed cooling system plays the role of manual adjustment.
The cooling effect should be carried out in time.
Another point to remind everyone is that in the cooling process, we must pay attention to the gradual circulation to avoid temperature difference
.

3.
The temperature of the medical high and low temperature cycle device also varies with the amount of material processed.
The more material is processed, the higher the required temperature.
Here, I would like to remind the equipment operators that the temperature may not be within the specified amount due to too much material.
It is also normal to reach the ideal temperature within a certain time
.