Maintenance method of glass reaction kettle

Glass reactor is a kind of commonly used reactor product, which has the advantages of flexible use, high reliability, high stability and easy operation There will be some dirt and wear problems in the use of glass reactor, which will have a certain impact on the performance of the product So how to maintain the glass reaction kettle? Let's introduce the maintenance methods of the glass reaction kettle in detail, hoping to help you Maintenance method of glass reaction kettle 1 Before use, carefully check the instrument, whether the glass bottle is damaged, whether the interfaces are consistent, and handle with care 2 Wipe each interface with soft cloth (instead of napkin), and then apply a little vacuum grease (the vacuum grease must be covered after use to prevent the lime sand from entering ）3 The interfaces of the glass reaction kettle shall not be tightened too tightly It is necessary to loosen and activate the connections regularly to avoid the connector from being locked for a long time 4 Turn on the power switch first, and then let the machine run from slow to fast When the machine is stopped, turn off the switch 5 The polytetrafluoroethylene switches at all places shall not be over tightened, which is easy to damage the glass 6 After each use, all kinds of oil stains, stains and solvent remaining on the surface of the machine must be wiped with a soft cloth to keep it clean 7 After the machine is stopped, loosen the polytetrafluoroethylene switches, which will deform the polytetrafluoroethylene piston if it is still in the working state for a long time 8 Clean the sealing ring regularly by taking off the sealing ring, checking whether there is dirt on the shaft, wiping it with a soft cloth, then applying a little vacuum grease and refitting it to keep the shaft and the sealing ring smooth 9 The electrical part shall not be allowed to enter into water, and shall not be damped 10 The original accessories must be purchased Using other accessories at will will will cause fatal damage to the machine 11 For any repair or inspection of the glass reaction kettle, the power and water must be cut off first.