Maintenance of manual electrostatic spray guns

to protect the safety of the gun, the resistance of the gun, the power resistance, and the resistance bar resistance of the spray gun must be detected within a certain period of time to confirm that it is in good condition and the seals are not leakingProblems should be caused to deal with or replace parts in a timely mannerin order to ensure the spray effect of the spray gun, its voltage, flow, fog, spray effect should be regularly testedThe voltage can be detected by a special instrument to confirm whether the use requirements are met, check whether the electrode needle is in tact, should be discharged sufficiently, if the failure should be replaced in time, for the built-in generator gun, should also always check the performance of the generatorafter each spray, the internal pipeofe of the spray gun, gun cap, etcshould be cleaned to ensure that its internal pipe and spray gun cleanNote that the air holes of the gun cap cannot be damaged, nor should the electrode needles be destroyed, and the solvent used for cleaning should be guaranteed as a non-conductive solvent