Maintenance of UV light test chambers

1.
The shell of the digital explicit light incubator should be reliable grounding device
.

2.
When the sun is shining, the "program-controlled time controller" can independently write the program and manipulate the time
.

How to write the program, please refer to the "programmable time controller" instruction manual
.

3.
In order to ensure the reasonable heat dissipation of the cooler geothermal tube, the spacing between the cooler and the wall should exceed 100mm, the side of the shell should have a 50mm gap, and the top of the shell should have at least 300mm indoor space
.

4.
The digital explicit light incubator should be placed in a shaded, dry, natural ventilation area, and no heat source and wind and sun in the area
.

The placement is stable and prevents vibration from generating noise
.

5.
When the number explicit light incubator is refrigerated, it is not suitable to make the difference between the temperature in the cabinet and the working temperature exceed 25 degrees
.

6.
When transporting, overhauling and maintaining the digital explicit light incubator, it should prevent impact, shaking vibration, and the large slope is less than 45 degrees
.

7.
The instrument and equipment are suddenly not working, please check whether the fuse tube (behind the box) is burned and check the status of
the power supply system.