Maintenance of water bath constant temperature oscillator

Maintenance of water bath constant temperature oscillator Water bath constant temperature oscillator, also known as water bath constant temperature shaker, has high temperature control accuracy, convenient temperature adjustment and accurate and intuitive display value
.

So do you know how to maintain it in your daily life? Let’s find out with me below
.

1.
During the continuous operation of the water bath constant temperature oscillator, regular inspections should be made every three months: check whether water droplets, dirt, etc.
fall on the motor and control components; check the water quality and cleanliness in the water tank; check the fuse, control components and fastening screws
.

2.
Correct use and pay attention to the maintenance of the water bath constant temperature oscillator, so that the water bath constant temperature oscillator is in good working condition, which can prolong the service life of the instrument
.

3.
In dry air, if there is less dust or the dust has not been damp and formed into lumps, it can be wiped with a dry cloth, brushed with a towel, brushed with a soft brush, etc.
; The inflator blows air to remove dust, and vacuum cleaners can also be used to remove dust; the dust in the diagonal corners and seams can be combined with the above methods to remove dust
.

It is not advisable to wipe the discolored surface and electrical control parts with a damp cloth
.

If the dirt is not easy to wipe clean, it can be wiped with a cotton ball dipped in alcohol, or cleaned
.

 　　4.
After long-term use of the water bath constant temperature oscillator, natural wear and tear is a normal phenomenon
.

After the water bath constant temperature oscillator has been used for one year, if it is found that the motor has abnormal noise, the heating system is abnormal, the bearing of the transmission part is worn, the belt is loose or cracked, the heating constant temperature is abnormal, and the electronic control element fails, etc.
, it should be repaired in time.

.

 　　The above is the relevant introduction about the maintenance of the water bath constant temperature oscillator.
I believe that everyone has a corresponding understanding of this after reading.
Correct use and maintenance of its equipment can keep it in good working condition.
I hope it will be helpful to you.

.