Maintenance procedures and precautions of self-adhesive labeling machine

There are several procedures that must be carried out in the daily maintenance of plane labeler and other self-adhesive labeler

They are cleaning, fastening, adjusting, lubricating and working of the equipment

In the ordinary production process, the machine maintainer shall: according to the maintenance rules of the labeling machine manufacturer, carry out various maintenance work, reduce the wear speed of parts, eliminate the hidden danger of failure, and extend the service life of the machine

Equipment maintenance includes routine maintenance, regular maintenance and special maintenance

Regular maintenance can be divided into three categories: first level maintenance, second level maintenance and third level maintenance

The following article will introduce the specific procedures and precautions of these types of maintenance work

The routine maintenance of the labeling machine focuses on cleaning, lubrication, inspection and fastening, and shall be carried out as required during and after the operation of the machine

The first level maintenance is carried out on the basis of routine maintenance

The key work is lubrication, fastening and inspection of relevant parts and cleaning work

The second level maintenance focuses on inspection and adjustment

Check the electrical appliances, transmission components and mechanical components

The three-level maintenance focuses on detection, adjustment, troubleshooting and balancing the wear degree of each component

It is necessary to carry out diagnosis detection and state inspection on the parts that affect the use performance of the equipment and the parts with fault symptoms, so as to complete the necessary replacement, adjustment and troubleshooting.