Management principles and requirements of dust-free air shower room

The air shower room is the necessary dust removal and purification equipment for all kinds of food and photoelectric industry, pharmaceutical factory, automobile, aerospace industry and other production workshops It is installed between the clean room and the non clean room When people and goods want to enter the clean area, they must be blown and drenched by the wind shower room The strong and clean air blown out can effectively remove the dust, hair, hair chips and other sundries attached to people and goods Through the primary effect and filter, it can effectively block or reduce the dust entering the clean workshop, so that the workplace can meet the strict health standard In the process of production, health monitoring and management should be done well to prevent cross contamination, which plays an important role in product quality Therefore, the process health management system of clean area of dust-free air shower room is established The management principle of dust-free air shower room: 1 The management of entering the air shower room, including the access of personnel, materials, all kinds of equipment, as well as the maintenance and management of relevant equipment and pipelines, should not take particles and microorganisms into the air shower room 2 Operation management technology: the production, wearing and cleaning of the clean work for the personnel in the wind drenched room, the movement and action of the operator, the selection and cleaning of indoor equipment and decoration materials, sterilization, etc shall be minimized to prevent the generation, retention and propagation of dust particles and microorganisms in the wind drenched room 3 Strictly maintain and manage all kinds of equipment and facilities, formulate corresponding operation procedures, ensure all kinds of equipment and facilities to operate normally as required, including purification system, all kinds of water, gas, electric system, production process equipment and tools (tool clips), etc., to ensure the production process requirements and air cleanliness level of products 4 Cleaning, sterilization management, cleaning and sterilization of all kinds of equipment and facilities in the air shower room, as well as clear regulations on methods, cycles and inspections, to prevent, remove dust particles in the air shower room, production, retention and reproduction of microorganisms 5 The environmental control of the air shower room includes: air purification, clean building, pollution control of water or gas or chemicals in direct contact with products, production equipment, tools, etc., and control and prevention of particle vibration, noise, static electricity, etc Shanghai Sujing Industry Co., Ltd if you have any need, you can pass with us at any time Thank you very much for your support and look forward to cooperating with you Thank you & bestragard! Suing Jinghua