-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The small nucleic acid detection reagent filling machine is designed for small-dose reagent tube filling and capping, peristaltic pump filling, and the imported cam divider provides precise workstations to ensure the accuracy of filling and capping.
Screw cap, three-claw pneumatic screw cap, stable operation, reasonable design, made of SUS304 and 316L stainless steel, fully meet the requirements of the new version of GMP, is a reagent filling equipment for pharmaceutical industry, hospital preparations
.
The small nucleic acid detection reagent filling machine is widely used in daily chemical, pharmaceutical and other industries, and can fill different high-viscosity fluids
.
The design of the machine is compact and reasonable, the appearance is simple and beautiful, and the filling volume adjustment is convenient
.
At present, most of the liquid filling machines on the market use touch screen and Chinese display
.
Just follow the information displayed on the device and operate it easily
.
The filling machine can complete the entire filling line operation together with other equipment
.
During the operation of the liquid filling machine, special attention should be paid to the following items: 1.
Before starting the equipment, carefully check the disinfection liquid level; check whether the switching power supply and standard air pressure are normal; check whether the relay and cylinder are in good condition; Is the position of the centrifugal pump appropriate
?
If an abnormal situation occurs, you need to clear the fault information before starting the device
.
2.
The equipment is automatically cleaned, sterilized, canned, covered and covered during the filling process, and is not affected by human factors
.
The operator always pays attention to the operation of the equipment.
If there is an abnormality, the equipment should be changed to manual mode to avoid safety accidents
.
After the production task is completed, the residual liquid in the equipment should be drained in time, the gas and water should be disconnected, and the power supply should be cut off
.
Screw cap, three-claw pneumatic screw cap, stable operation, reasonable design, made of SUS304 and 316L stainless steel, fully meet the requirements of the new version of GMP, is a reagent filling equipment for pharmaceutical industry, hospital preparations
.
The small nucleic acid detection reagent filling machine is widely used in daily chemical, pharmaceutical and other industries, and can fill different high-viscosity fluids
.
The design of the machine is compact and reasonable, the appearance is simple and beautiful, and the filling volume adjustment is convenient
.
At present, most of the liquid filling machines on the market use touch screen and Chinese display
.
Just follow the information displayed on the device and operate it easily
.
The filling machine can complete the entire filling line operation together with other equipment
.
During the operation of the liquid filling machine, special attention should be paid to the following items: 1.
Before starting the equipment, carefully check the disinfection liquid level; check whether the switching power supply and standard air pressure are normal; check whether the relay and cylinder are in good condition; Is the position of the centrifugal pump appropriate
?
If an abnormal situation occurs, you need to clear the fault information before starting the device
.
2.
The equipment is automatically cleaned, sterilized, canned, covered and covered during the filling process, and is not affected by human factors
.
The operator always pays attention to the operation of the equipment.
If there is an abnormality, the equipment should be changed to manual mode to avoid safety accidents
.
After the production task is completed, the residual liquid in the equipment should be drained in time, the gas and water should be disconnected, and the power supply should be cut off
.
