echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Natural stone powder coating all kinds of wall-based construction process

    Natural stone powder coating all kinds of wall-based construction process

    • Last Update: 2020-12-14
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    First, the main material and auxiliary materials
    1, the main material: natural stone powder coating stone powder distribution special substrate
    2, auxiliary materials: sand cloth, textured paper, anti-embroidery paint, aluminum alloy by foot, right angle ruler, ink, white latex, glass Fiber mesh cloth, such as
    3, application tools: flat coating, decorative wipes, steel scraper shape, brush, roller barrel, mold, etc.
    2, transport conditions and storage
    1, storage and transportation according to non-dangerous goods.
    2, material storage should ensure ventilation, drying, to prevent sun exposure, the temperature of 5 degrees C-35 degrees C; The package shall not be dumped or inverted; The number of heap layers please note the package identification.
    III, process practices
    (i) concrete wall practices:
    layering practice examples
    1, apply 0.5-1.0 thick natural stone powder coating surface layer
    2, apply 0.8-1.2 thick natural stone powder coating to find flat
    3, apply 0.8-1.2 thick natural Stone powder paint to find flat
    4, brushing the back cover liquid back
    5, 5-10 thick special substrate repair wall
    detailed description:
    1, grass treatment:
    surface sand, splashes and mortar traces, such as wire brush, blade, , broom clean
    China
    .
    oil is washed with 10% hydroxide solution and then rinsed with water.
    surface pan-alkali, with 3% herbal acid aqueous solution for mediuming, and then rinsed with clean water.
    . Surface mold, with 5% bleached powder water solution for balance, stay for a few minutes to rinse clean (Note: the operation should wear a glue sleeve)
    nail holes, rebar head brush anti-rust paint, cracks with expansion seam gypsum to level, paste perforated ppylographic paper tape and really cool cloth.
    2, find flat: apply the substrate to find flat, the use of special substrate and liquid according to the ratio of 2:1 to reconcile into a uniform slurry, scraping requires horizontal vertical, divided into 2-3 layers of coating, the total thickness of about 5-10mm.
    3, brush anti-alkali primer: the primer applied optional spray and roll coating, no special wall for the choice.
    4, looking for Yin, yang angle and substrate repair: Yin angle with right angle ruler and bullet line method. The method of using aluminum alloy to lean on the ruler and the right angle ruler for the yang angle.
    5, flat scraping stone powder paint three times:
    (1) the first time stone powder paint, powder and liquid ratio of 2:1, material dosing (depending on the base conditions) is about 1.0kg/m2. Requires basic no scratches, basic leveling, routine application or scraping (Note: not less than 2 hours per interval, whichever is dry)
    (2) second stone powder paint, material ratio with the first time, material dosage of about 1.0 kg/m2, requires no scratches, smooth surface, routine application or scratching (Note: Each interval is not less than 2 hours, to dry permeable)
    (3) the third time stone powder paint, the material ratio with the first time, the material dosing is about 0.5-1.0 kg / square meters, require scraping the third time before sandpaper polishing flat, other construction has been basically completed, so as to avoid dust and other pollution. Two people are required to cooperate with the construction. One scrape, one after the flat, closed. After drying, the effect surface is flat, smooth and feels good. Clean the corner area and do a good job of protecting the finished product.
    (ii) Hollow block wall practice
    scale practice example
    1, apply 0.5-1.0 thick natural stone powder coating surface layer
    2, apply 0.8-1.2 thick natural stone powder coating to level
    3, smudge 0.8 -1.2 thick natural stone powder paint to find flat
    4, brush the back cover liquid back
    5, thick special substrate to find flat
    6, paste a layer of glass fiber mesh cloth on the masonry wall
    detailed description:
    1, grass-roots treatment:
    futon with broom clean.
    nail holes, rebar head brush rust-proof paint, cracks with expansion seam gypsum to level, paste perforated verse paper tape and indeed cool cloth.
    . Brush high-quality white latex on the wall of the block with rollers
    . . on the surface of the glue full of sticky glass fiber mesh cloth, with a wipe to flatten
    2, find flat: apply the base material to find flat, the use of special substrates and liquid according to the ratio of 2:1 to mix into a uniform slurry, scraping requires horizontal vertical, divided into 2 layers of coating, the total thickness of about 5mm.
    3, brush anti-alkali primer: the primer applied optional spray and roll coating, no special wall for the choice.
    4, find Yin, Yang angle: Yin angle with right angle ruler and bullet line method. The method of using aluminum alloy to lean on the ruler and the right angle ruler for the yang angle.
    5, flat scraping stone powder paint three times:
    (1) the first time stone powder paint, powder and liquid ratio of 2:1, material dosing (depending on the base conditions) is about 1.0kg/m2. Requires basic no scratches, basic leveling, routine application or scraping (Note: not less than 2 hours per interval, whichever is dry)
    (2) second stone powder paint, material ratio with the first time, material dosage of about 1.0 kg/m2, requires no scratches, smooth surface, routine application or scratching (Note: Each interval is not less than 2 hours, to dry permeable)
    (3) the third time stone powder paint, the material ratio with the first time, the material dosing is about 0.5-1.0 kg / square meters, require scraping the third time before sandpaper polishing flat, other construction has been basically completed, so as to avoid dust and other pollution. Two people are required to cooperate with the construction. One scrape, one after the flat, closed. After drying, the effect surface is flat, smooth and feels good. Clean the corner area and do a good job of protecting the finished product.
    (iii) Cement mortar platstone wall practice
    rated practice example
    1, apply 0.5-1.0 thick natural stone powder coating surface layer
    2, apply 0.8-1.2 thick natural stone powder coating to level

    3, apply 0.8-1.2 thick natural stone powder paint to find flat
    4, brush the back cover liquid back
    5, yin and yang corner repair
    details:
    1, grass-roots treatment: futon with broom removal clean.
    2, yin, yang angle dressing: the use of special substrate and high-strength gypsum mixed powder for yin and yang angle repair, yin angle with right angle ruler and bullet line method, yang angle with aluminum alloy by ruler and right angle ruler method.
    3, brush anti-alkali primer: the primer applied optional spray and roll coating, no special wall for the choice.
    4, flat scraping stone powder paint three times:
    (1) the first time stone powder paint, powder and liquid ratio of 2:1, material dosing (depending on the base conditions) about 1.0kg/m2. Requires basic no scratches, basic leveling, routine application or scraping (Note: not less than 2 hours per interval, whichever is dry)
    (2) second stone powder paint, material ratio with the first time, material dosage of about 1.0 kg/m2, requires no scratches, smooth surface, routine application or scratching (Note: Each interval is not less than 2 hours, to dry permeable)
    (3) the third time stone powder paint, the material ratio with the first time, the material dosing is about 0.5-1.0 kg / square meters, require scraping the third time before sandpaper polishing flat, other construction has been basically completed, so as to avoid dust and other pollution. Two people are required to cooperate with the construction. One scrape, one after the flat, closed. After drying, the effect surface is flat, smooth and feels good. Clean the corner area and do a good job of protecting the finished product.
    , quality standards:
    1, to ensure the project: the materials used varieties, quality, color are in line with the design requirements, in strict accordance with the product portfolio supporting the use.
    2, basic projects: the construction surface color is consistent, do not show connectors, no leakage brush, bottom defects.
    1, before the construction will be painted parts to block, to prevent sticky.
    2, remove and turn over the shelf, strictly prevent collision and pollution coating.
    3, after the tool is used, should be cleaned in time to ensure that the next time continue to use.
    4, the remaining materials are strictly prohibited to dump at will.
    dust when sanding with 5 and sandpaper.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.