echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Notes on discharging of oral liquid filling machine

    Notes on discharging of oral liquid filling machine

    • Last Update: 2017-11-17
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Since the machine is a easy to pull bottle filling and locking device, the discharge has been capped and sealed In order to prevent the bottle after filling and locking from overturning, it is necessary to put several empty bottles on the discharge hopper in advance before discharging the first bottle to keep the bottle after filling and locking smoothly transported to the discharge hopper, and send it to the next work sequence with the bottle hopper 5 The locking device is designed for easy pull bottle based on the advanced foreign technology and the production situation of oral liquid in China Therefore, there are certain requirements for the geometric dimension and error of easy pull bottle If there are special requirements or other specifications, please contact the technical department of the factory 6 Adjustment of the locking device A adjustment of the gland time: adjust the rotation angle of the cam 3 When the filling liquid bottle enters the tooth position of the locking mouth, the locking shaft has moved and leaves the bottle cap before moving the tooth close to the bottle B adjustment of gland pressure: the size of gland pressure is directly related to the quality of the lock mouth If the pressure is too large to make the easy pull bottle broken, the sealing performance will be affected if the pressure is too small Therefore, adjust the nut 6 according to the actual average height of the easy pull bottle, so that the pressure can be adjusted to the best Zui C adjustment of blade action time: blade 2 should be close to the bottleneck before the end of gland, otherwise some short bottles can not reach the locking effect Loosen nut 4 during adjustment, and adjust shaft 5 and up and down to make blade 2 action time sooner or later Note that the spring force of adjusting spring 7 should be greater than that of spring 8 to keep the bottleneck consistent D when adjusting the lock mouth, attention shall be paid to the locking of nuts after the adjustment of each department During the initial valve test, the easy pull bottle shall be used, and its average height shall be taken The irregular easy pull bottle shall not enter the lock mouth, so as to avoid damaging the parts 7 Adjustment of vibrator: the automatic cap dropping adopts the electromagnetic oscillation principle to drop the cap to a proper position along the track according to a certain motion track A the vibrator is packed separately when leaving the factory, and the lower rail mouth must be aligned with the moving rail of the easy pull bottle when it is installed B adjustment of magnet gap: loosen the screw 1, open the cover, adjust the nut 2 to make the magnet gap 0.6-0.8, and make the vibration sound Zui low and the line speed Zui fast.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.