Notes on the use of photocatalytic reactor

Photochemistry series instruments include photochemistry reaction instrument, photochemistry reaction kettle, photocatalysis reaction device, etc all belong to this series Chuanyi low temperature experimental equipment, ultrasonic equipment and other products are developed, produced and sold in one company Most of the photochemistry series products are of the same model Here is a brief introduction of the precautions when using these instruments The following basic safety measures must be observed at all stages of operation, maintenance and instrumentation Operate the instrument according to the instructions when it is used If it is used in violation of the regulations, the instrument will not work normally, and the instrument will be damaged First, in order to avoid electric shock, the input power line of the instrument must be grounded The instrument uses a three core grounding plug, which has a grounding base If the plug cannot be inserted into the base, the electrician should be asked to install the correct socket, so as not to lose the grounding protection function of the instrument Second, use the power supply note: before connecting the AC power supply, ensure that the voltage is consistent with the voltage required by the instrument (allowable ± 10% deviation), and ensure that the rated load of the power socket is not less than the requirements of the instrument Third, use the power cord note: this instrument usually uses the power cord attached If the power cord is damaged, it must be replaced without repair The power cord of the same type and specification must be used for replacement No objects are allowed to be placed on the power line when this instrument is used Do not place the power cord where people walk Pay attention to the placement of the instrument: the instrument shall be placed in a cool, ventilated, dry and dust-proof place In order to better heat dissipation effect, the effective distance (n > 30cm) shall be kept between the instrument ventilation place and other articles Our company's photochemistry series photochemistry reaction instrument is successfully developed under the technical support of many professors from Shanghai Jiaotong University and East China University of science and technology It is mainly used to study photochemistry reaction in gas or liquid phase medium, fixed or flowing system, ultraviolet or simulated visible light, and whether the reaction vessel is loaded with photocatalyst The photochemical reactor has the functions of providing samples for the analysis of reaction products and free radicals, measuring reaction kinetic constants, measuring quantum yield, etc it is widely used in the fields of chemical synthesis, environmental protection and life science