One step to develop high-temperature heat treatment material equipment

Changzhou One Step Drying Equipment Co.
, Ltd.
has developed a new type of high temperature heat treatment material equipment HYD series rotary calcination kiln, which performs pyrolysis, crystal conversion, oxidation and activation of powdery granular materials at a calcination temperature of 350 °C ~ 1050 °C, which can be applied to the production process
of special materials in petrochemical, inorganic chemical, metallurgy, construction and other industries.

The calcination kiln adopts electric heating radiation or burner heating to the process requirements, the material is fed into the furnace barrel by the screw feeder of the feeding system, and the material is slowly moved forward through the furnace barrel with inclination under the copying plate while calcining, and enters the rotary cooling kiln to discharge the material after reaching the
process requirements 。 The equipment can be heated by electricity, gas and oil, and the calcination temperature can be set in different regions, and the working temperature of each region can be freely controlled by adjusting the power; The calcination time and the residence time of the material in the furnace cylinder are adjusted according to the moisture content and final moisture content of the material, the speed, the tilt angle, the combustion temperature, etc.
; According to the calcination process curve and material characteristics, a variety of calciner plate reading forms
can be selected.

At the same time, the equipment is equipped with an accidental power failure brake protection device, which has the characteristics
of high degree of automation, low operating intensity, good operating environment, good thermal insulation and sealing performance, and small heat loss.
In addition, the equipment has a solid structure, can operate continuously for a long time, is easy to dock with upstream and downstream equipment, simple maintenance and convenient
maintenance.