Operating procedures for electric heating reactor

Operating procedures for electric heating reaction kettle and stainless steel reaction kettle: 1 It shall be installed on a solid and flat workbench, and the height of the workbench shall be determined according to the use situation There shall be a certain space (≥ 360cm) around the equipment and workbench for installation and later maintenance 2 During installation, the transmission shaft shall be vertical to the ground horizontal plane, and the non perpendicularity (inclination) shall not be greater than 1 / 1000 of the total height of the equipment 3 The self-contained parts and safety valves on each process connecting pipe of the equipment must be equipped according to the requirements of the reactor 4 After installation, check whether all connecting parts and transmission parts are firm and reliable Conduct air tightness test for connecting pipes, nozzles, seals and the whole machine, and there shall be no bubble, emission, drop and leakage 5 Before start-up, the reducer shall be injected with 46 × mechanical oil, the motor protective cover shall be opened, the fan blade shall be rotated by hand to check whether there is any jamming, the mixing paddle shall be free of wall scraping, and the reactor shall be cleaned before start-up No abnormal noise or vibration is allowed until the empty car runs for 30 minutes In addition, change the reducer oil regularly according to the production situation Liaoyang Zhenxing vacuum equipment factory is a specialized backbone enterprise which mainly produces vacuum equipment and pharmaceutical machinery equipment It mainly produces vacuum equipment, heat exchange and heating system equipment, pharmaceutical machinery, water treatment equipment, various pumps, instruments and automatic control and other new products Products are widely used in machinery, petroleum, chemical industry, papermaking, medicine, food, sugar, electricity, metallurgy, building materials, plastics, mines, coal and other fields.