echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Operation instruction of special sugar coating machine

    Operation instruction of special sugar coating machine

    • Last Update: 2016-05-13
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    The working principle and characteristics of the special-shaped sugar coating machine 1 The working principle is to make the chip evenly coated with coating crystal as soon as possible, and achieve the purpose of polishing It is necessary to spray syrup on the chip in the pot in several times, and then rotate clockwise through the pot body to make the sugar coated chip roll, rub and grind in the pot, so as to make the sugar coating uniform At the same time, the hot air is put into the pot to remove the water on the sugar coated surface of the tablet quickly, and the uniform and smooth sugar coated tablet is obtained after Zui This machine is a common equipment for sugar coating process It rotates at a stable linear speed of the pot body, so that the tablets form a Zui good parabolic curve in the pot, so as to meet the process requirements of uniform thickness of sugar coating layer, bright color and no pockmarks 2 Features of the machine (1) The machine is a one-way, low and continuous rotating packaging equipment The main motor drives the pot body to rotate through a worm and worm gear with belt drive, (2) The machine is equipped with an eccentric wheel, which can be used by the user to adjust the tilt angle of the sugar coating pot according to the characteristics of the pills (the charging amount of the boiler body of this machine is taken as the reference value when the inclination angle of the boiler body is 30 °) (3) the worm and worm wheel are used as the terminal output of the movement, and the operation is stable The hot air drying device is heated by resistance wire The bearing, worm and worm wheel in the gearbox of special sugar coating machine are lubricated by splash lubrication One bearing on the upper part of Zui is lubricated by oil cup, which should be filled regularly The gearbox oil is changed every half a year, hj-10 is used for the gearbox oil pool, and ZG-2 calcium base grease is used for rolling bearing Special sugar coating machine installation and debugging 1 After the machine is in place, it must be placed stably and fixed with anchor bolts 2 Open the oil filling cover and add lubricating oil to the gearbox to the oil mark 3 After the power is turned on, pay attention to the phase sequence to make the sugar coated pot rotate clockwise 4 During the test run, pay attention to whether the machine has noise, so as to stop the machine for inspection in time 5 The dip angle of sugar coated pot is related to the capacity and material properties When the dip angle of sugar coated pot is 30 °, its production efficiency and quality are good Operation rules of special sugar coating machine 1 Before operation, carefully check whether the fasteners of all parts of the machine are loose 2 Scrub the inside and outside of the sugar coating machine 3 Start the main motor and allow the machine to idle for 2 minutes in order to judge whether there is a fault 4 After feeding, press the button of the main motor first, then press the button of the blower according to the sugar crystallization, and turn on the electric heater switch at the same time.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.