Operation instructions of the enamel reactor supporting the hot and cold circulation equipment

1, the fully enclosed cold and heat integrated machine device is divided into heating part and cooling part of the two parts, the temperature control temperature is accurate, widely used in chemical, reactor, new energy and other industries, can achieve high and low temperature switching each other, accelerate the production progress, reduce production energy consumption
.
2.
The pressure control device of the fully enclosed cold and heat integrated machine device is a pressure gauge and pressure, which is mainly used for regulation
.
When temperature throttling occurs, the oil passes through the shunt, and the flow control of the equipment is achieved through the adjustable flow valve in the system, the function is to control the amount of heat transfer oil entering the heater at each time and fine-tune the temperature
of the heater accordingly 。 3, the appearance of the fully enclosed cold and heat integrated machine device is good-looking, the isolated electrical control box, can extend the service life of the electrical appliances, the pipeline explosion-proof device, built-in safety protection, good thermal insulation performance, the controller according to the temperature sensor to measure the thermal fluid temperature or temperature control equipment internal temperature, adjust the temperature of the thermal fluid to adjust the temperature of the temperature control equipment, the general water as the medium to control the temperature range is low, with oil as a heat transfer medium to control the temperature range is wider
。 4.
The temperature control of the heating process surface of the fully enclosed cold and heat integrated machine device is mainly achieved by the size of the throttle valve opening, and the temperature can be controlled during the operation of the equipment, and the temperature is displayed
according to different measurement positions by the thermocouple thermometer with different structures.
4.
When there is a large number of thermal equipment and the temperature gradient required for the process surface of the heating equipment is large, different oil pumps can be used for parallel oil supply, and the supply
of different oil quantities can be realized based on the requirements of the system for thermal energy.
There are many fully enclosed cold and heat integrated machine devices, but the operation matters are similar, so in order to use the equipment for a long time and stably, users still need to learn the maintenance knowledge and operation of
the equipment.