Operation key points of autoclave console

1) After the console is unpacked, the electrical components inside shall be inspected first to see if there is any damage or corrosion caused by poor transportation or storage, whether the fixed contact and movable contact are normal, and whether the movable part moves flexibly 2) Operation of electric heating: first, set the required temperature with the dial of the temperature control instrument; pull the heating switch, and the circuit works, as mentioned above, so as to achieve the purpose of constant temperature and meet the requirements of heating speed 3) Operation of rotating mixing: turn on the mixing power switch, and the mixing servo motor can start to operate when the silicon controlled rectifier is conductive In order to obtain any desired speed, adjust the potentiometer of mixing control, change the phase of the trigger circuit output pulse, that is, change the conduction angle of the silicon controlled rectifier, so that the output DC voltage changes to meet the requirement of none It is necessary to adjust the speed of rotation and agitation 4) Pressure control: adjust the upper and lower limit of the electric contact pressure gauge according to the use requirements 5) Maintenance and service of control console: before normal operation, it is necessary to carefully check whether there is any abnormality; during normal operation, the upper cover shall not be opened to prevent touching the live part The measuring instruments shall be calibrated regularly to ensure their accurate and reliable operation.