echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Paint common sense: six tips for wood paint construction to create a perfect home

    Paint common sense: six tips for wood paint construction to create a perfect home

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: the correct paint construction method can make the paint play a professional role As for wood paint, if you want to get a good effect, you must pay attention to the construction method Here are six tips for wood paint construction Wood paint construction know-how 1: dust removal in advance First of all, the surface of the wood should be polished and leveled to deal with the floating ash When cleaning, a special dust cloth can be used, and a large area (such as the ground plate) can be repeatedly vacuumed with a vacuum cleaner Wood paint construction know-how II: different materials Understand the wood of wood If it is hard wood (such as teak, beech, Bengal), be careful to use putty, foam water and other primers to avoid discoloration and Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Paint Home News: the correct paint construction method can make the paint play a professional performance As for wood paint, if you want to get a good effect, you must pay attention to the construction method Here are six tips for wood paint construction Wood paint construction know-how 1: dust removal in advance First of all, the surface of the wood should be polished and leveled to deal with the floating ash When cleaning, a special dust cloth can be used, and a large area (such as the ground plate) can be repeatedly vacuumed with a vacuum cleaner Wood paint construction know-how II: different materials Understand the wood of wood, if it is hard wood (such as teak, beech, Bengal), it should be careful to use putty, foam water and other priming to avoid discoloration and impact on adhesion Hard wood, want to get the best effect, directly brush the paint, if you need to fill the gap, it is recommended to use the paint and fine wood powder to stir evenly to fill; For general wood, if transparent putty is needed for base material treatment, the whole base course shall be evenly applied with scraper first, which should be thin rather than thick After drying, it shall be evenly polished and the redundant transparent putty attached to the wood surface shall be thoroughly polished to avoid paint damage Wood paint construction know-how three: paint preparation When painting, the environment and painting tools must be clean Operators should wear clean work clothes and clean work caps Wood paint construction know-how four: coating grasp The painting should be thin and not thick, which can be carried out in multiple layers; when multi-layer painting construction is carried out, each painting should be carried out after the lower layer is dry, and each painting should be polished Wood paint construction know-how five: suitable temperature construction When the temperature drops below 5 ℃, the drying time of the paint will be prolonged At the same time, if the temperature is too low, the phenomenon of white fog or extinction will occur Therefore, the construction should be avoided under this condition If the temperature is too high, the paint will dry quickly and produce pinholes or bubbles Therefore, the high temperature construction should also be avoided as far as possible Wood paint construction know-how six: humidity control When the environmental humidity is more than 85%, it is not suitable for construction, otherwise, it is easy to cause defects such as white paint film Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.