Paint common sense: solution to water spots in paint construction

Core tip: phenomenon description There are many different shapes on the film Generally, the color in the impression is slightly lighter than the color of the surrounding paint film Causes During spraying or drying, water drops fall on the surface of the film and evaporate The reasons are: 1 Before the paint film is completely hardened, it is rained or splashed with water drops 2 Rain or water drops splashed on the too thick polishing wax film preventive measure 1 Before the paint film is completely hardened, prevent water drop from falling on it 2 paint film table Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Paint Home News: phenomenon describes the appearance of a film with different shapes Generally, the color in the impression is slightly lighter than the color of the surrounding paint film The reason is that in the process of spraying or drying, water drops fall on the surface of the paint film and then evaporate The reasons are as follows: 1 Before the film is completely hardened, it is rained or splashed with water drops 2 Rain or water drops splashed on the too thick polishing wax film Preventive measures 1 Before the paint film is not completely hardened, water drop shall be prevented from falling on it 2 The protective wax on the surface of the paint film shall not be too thick Repair method: remove the water film from the defective area, gently grind it flat, and then polish it Repeat the above steps if necessary In case of severe conditions, the top coat shall be reapplied Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,