echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Paint construction common problems and solution skills

    Paint construction common problems and solution skills

    • Last Update: 2020-12-24
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    paint is an important part of interior decoration, prone to some difficult problems, people can not help. In fact, as long as you find out the real cause of the problem, the cure for the disease, there will be satisfactory results, the following is for the paint easy to produce problems, put forward solutions, so that you can be more comfortable in the interior decoration.paint peels off the surface may be too smooth. If the original paint is light paint or powdery (plus untreated slurry paint), the new paint on the surface will not stick. Or it could be wood decay or rusty metal, or it could peel off due to poor paint quality. Small area of paint peeling, can be polished with fine sandpaper, and then putty, paint primer, and then repaint; Large areas of peeling must be scraped off and repainted.cracks occurmost of these cases are removed with chemical depainting agents or hot air spray guns and then repainted. If the fracture range is not large, then you can use sand scrubs or dry and wet sandpaper water, grind off the broken paint, smooth the surface, apply putty, paint the primer, and repaint.there are many reasonscan produce stains on the surface of the paint. For example: latex paint in the water melts the material on the wall and rust out of the paint surface, with wire velvet wiped over the wall will produce rust spots, the wall of the dark pipe leakage of stains and so on. In order to prevent stains, you can first brush a layer of aluminum powder primer; If the stain has appeared, you can first remove the stain on the latex paint, brush the layer of aluminum powder primer, and then repaint.loss of gloss the reason is that the primer is not on the primer, or the primer and the inner lacquer is not dry on the direct light paint, resulting in the paint is absorbed by the wood and lose the luster. The poor quality of light paint is also a reason. Use dry and wet sandpaper to grind off the old paint, brush to polish the dust, wipe the surface with a clean damper cloth, after drying out, and then repaint it. It is important to note that paint in very low temperatures may also lose its luster when the paint film is dry.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.