Paint formula: diluent and diluent reference formula

Core tip: in order to meet some performance requirements in the production process of building coatings, viscosity may be adjusted higher in the factory production, and it needs to be diluted to be suitable for coating For example, in order to prevent precipitation stratification, synthetic resin emulsion coatings are highly viscous, and must be diluted with water during construction In addition, after a long period of storage, the viscosity of some coatings may also be increased, and dilution is also required during coating Therefore, many coatings are equipped with diluent or the diluent to be used is specified in the product manual, so as to adjust the viscosity of the coating to meet the requirements of coating Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coating home news: in the production process of building coatings, for some performance requirements, the viscosity may be adjusted higher in the factory production, and it needs to be diluted to be suitable for coating For example, in order to prevent precipitation stratification, synthetic resin emulsion coatings are highly viscous, and must be diluted with water during construction In addition, after a long period of storage, the viscosity of some coatings may also be increased, and dilution is also required during coating Therefore, many coatings are equipped with diluent or the diluent used is specified in the product manual, so as to adjust the viscosity of the coating to meet the coating requirements For water-based coatings, diluent is water, but the water used is required to be clean, free of impurities and chemical components; for solvent based coatings, diluent generally needs to be matched with the coating The performance requirement of diluent is that the color should be light so as not to affect the color of the coating, the toxicity should be small, the health harm to the construction personnel will not be caused, and the cost should be relatively low Different coatings often require different diluents, there is no general diluent Commonly used commodity thinners include pine perfume, banana water, tin and so on Therefore, when diluting the coating, either use the matching diluent of the coating, or dilute according to the diluent variety specified in the coating specification The following describes the composition of some common diluents (1) The diluent for nitrolacquer is usually called banana water because it contains butyl acetate which smells like banana Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,