echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Paint knowledge | correct use of water-based wood paint, water-based wood paint use skills

    Paint knowledge | correct use of water-based wood paint, water-based wood paint use skills

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: decoration security network small make up this time to tell you how to use water-based wood paint, water-based wood paint use skills Wood paint use skills 1, grasp the humidity When the environmental humidity is more than 85%, it is not suitable for construction, otherwise, it is easy to cause defects such as white paint film 2 Pre dedusting First of all, the surface of the wood should be polished and leveled to deal with the floating ash When cleaning, a special dust cloth can be used, and a large area (such as the ground plate) can be repeatedly vacuumed with a vacuum cleaner 3 Suitable temperature construction When the temperature drops below 5 ℃, the drying time of the paint will be prolonged At the same time, if the temperature is too low, white fog or extinction will occur Therefore, construction under this condition should be avoided; direct sunlight or high temperature should be avoided Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Paint Home News: decoration small edition this time to tell you how to correctly use water-based wood paint, water-based wood paint use skills Wood paint use skills 1, grasp the humidity When the environmental humidity is more than 85%, it is not suitable for construction, otherwise, it is easy to cause defects such as white paint film 2 Pre dedusting First of all, the surface of the wood should be polished and leveled to deal with the floating ash When cleaning, a special dust cloth can be used, and a large area (such as the ground plate) can be repeatedly vacuumed with a vacuum cleaner 3 Suitable temperature construction When the temperature drops below 5 ℃, the drying time of the paint will be prolonged At the same time, if the temperature is too low, the phenomenon of white fog or extinction will occur Therefore, the construction should be avoided under this condition If the temperature is too high, the paint will dry quickly and produce pinholes or bubbles Therefore, the high temperature construction should also be avoided as far as possible 4 Painting procedure During the construction of floor paint, the impact on the wall emulsion paint shall be considered Generally, the wall shall be painted first, leaving the last layer, and then painted after the completion of floor paint construction 5 It depends on the material Understand the wood of wood, if it is hard wood (such as teak, beech, Bengal), it should be careful to use putty, foam water and other priming to avoid discoloration and impact on adhesion Hard wood, want to get the best effect, directly brush the paint, if you need to fill the gap, it is recommended to use the paint and fine wood powder to stir evenly to fill; For general wood, if transparent putty is needed for base material treatment, the whole base course shall be evenly applied with scraper first, which should be thin rather than thick After drying, it shall be evenly polished and the redundant transparent putty attached to the wood surface shall be thoroughly polished to avoid paint damage 6 Coating control The painting should be thin and not thick, which can be carried out in multiple layers; when multi-layer painting construction is carried out, each painting should be carried out after the lower layer is dry, and each painting should be polished 7 Timely construction The paint of two-component or three piece set must be evenly mixed after being proportioned, and then it shall be kept still for 15 minutes, so that the air bubbles caused by mixing can be discharged before use If necessary, it shall be filtered before use After the paint is proportioned, it shall be used up within 4 hours 8 Pay attention to safety The proportion and matching of the paint vary with the specific products The construction personnel shall read the product manual In addition, paint is inflammable, so pay attention to safety during construction Maintenance of wood furniture with lacquer 1 The wood furniture can be used normally only one week after being coated with water-based wood paint; keep the indoor air fluidity, temperature and humidity in an appropriate neutral state to ensure that the paint film on the surface of wood furniture reaches the normal hardness 2 Every few years, it is best to brush a layer of water-based wood paint again to keep the paint film of furniture fresh and durable 3 The furniture coated with wood paint can withstand the high temperature of the water cup, but it should not be close to the heater such as stove and heater piece, so as to avoid the deformation of wood furniture caused by high temperature baking, resulting in the cracking and peeling of the paint film surface 4 The paint film on the surface of wood furniture should be wiped with soft gauze to reduce dust and stains, and regularly wiped with car polish wax or floor wax to make the surface paint film bright as new 5 If the paint film on the surface of wood furniture is stained with stains, wash it with low concentration soap water or detergent water immediately, then wash and dry it with water, and finally wipe it with car polish wax The above is about the use of water-based wood paint skills and wood paint furniture maintenance, I hope to help you For more information, please pay attention to decoration Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.