Paint knowledge | five details that can not be ignored in wood paint construction!

Core tip: wood paint construction materials and tools are prepared before wood painting, We need to do a good job in all aspects of preparation The following are the details of wood paint that can not be ignored listed by Xiaobian Let's get to know! 1 The wood paint products that are not constructed at the same time with the latex paint contain toluene diisocyanate (TDI) If the wood paint and the latex paint are constructed at the same time, these TDI in the free state will react with the components in the latex paint, so that the latex paint can be painted The walls turn yellow So wood paint and latex paint can not be constructed at the same time It is recommended to brush the wood paint first and then the wall paint to prevent the components in the wood paint from polluting the wall 2 Prevent hardware pollution Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Paint Home News: wood paint construction materials and tools are ready to be painted before wood, We need to do a good job in all aspects of preparation Here are the details of wood painting listed by Xiaobian that can not be ignored Let's get to know! 1 Do not construct at the same time with latex paint The wood paint products contain toluene diisocyanate (TDI) If the wood paint and latex paint are constructed at the same time, these TDI in free state will react with the components in the latex paint, making the walls painted with the latex paint turn yellow So wood paint and latex paint can not be constructed at the same time It is recommended to brush the wood paint first and then the wall paint to prevent the components in the wood paint from polluting the wall 2 No matter what technology is used to prevent hardware pollution, first use masking paper to protect the hardware on the workpiece and prevent the hardware from being stained with wood paint In addition to the detailed operation and timely cleaning of the non hardware and other pollution places, the paint shall be applied first, and then the door lock, handle and bolt shall be installed to ensure the cleanness and beauty of the hardware 3 When the matching product wood paint is selected for construction, if the water-based wood paint is selected, it only needs to be diluted with water in proportion If nitrocellulose paint and polyurethane paint are selected, relevant curing agent and diluent shall be added, and they shall be mixed in strict accordance with the fixed proportion Therefore, nitrocellulose paint and polyurethane paint in the construction process, it is best to have professional guidance Strictly according to the proportion and select the matching diluent and curing agent to avoid undercutting, wrinkling and other problems 4 After the wood paint is mixed, filter it Because the dust in the air will form small particles when mixed with wood paint, if it is not filtered and brushed directly, particles will appear on the surface of the paint film, and the surface is not smooth Therefore, after the wood paint is prepared, it is necessary to use the filter screen to filter out the particles and impurities, and then it is better to carry out the construction after more than ten minutes of static 5 The remaining paint can be stored in a cool place for further storage after use Because of the addition of curing agent and diluent, nitrocellulose paint and polyurethane paint can only be used once, and the remaining paint can only be disposed At the same time, after the completion of the construction, the waste paint should be properly handled, and the tools should be cleaned in time Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,