Paint knowledge: how to paint cement floor

Core tip: paint the floor on the cement floor, which is beautiful and sanitary The ingredients and brushing methods are as follows: First, clean the floor and dry it Use the weight 1 (cooked tung oil): 2.5 (gasoline or loose perfume) to paint evenly on the ground to enhance the bonding strength between the cement floor and putty There are two kinds of putty: Gypsum and blood The weight ratio of gypsum putty is 16 (gypsum powder): 5 (cooked tung oil): 1 (Song Xiangshui): 6 (water), made together The composition weight ratio of blood putty is 16 (pig blood): 56 (white powder) In order to enhance wear resistance and waterproof performance, the Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Paint Home News: in the cement floor paint, both beautiful and sanitary The ingredients and brushing method are as follows: first, clean the ground and dry it Use the weight 1 (cooked tung oil): 2.5 (gasoline or loose perfume) to paint evenly on the ground to enhance the bonding strength between the cement floor and putty There are two kinds of putty: Gypsum and blood The weight ratio of gypsum putty is 16 (gypsum powder): 5 (cooked tung oil): 1 (Song Xiangshui): 6 (water), made together The composition weight ratio of blood putty is 16 (pig blood): 56 (large white powder) In order to enhance wear resistance and waterproof performance, it is better to add some tung oil properly and mix evenly After the putty is mixed evenly, it can be scraped to the painted ground with a blade, about 2-3 times, subject to leveling After the last coat of putty to be scraped is dry, it shall be polished with sandpaper and then painted with floor paint The floor paint should be thinned to avoid wrinkling The second coat can only be applied after the first coat is dry The paint was completely dry and finally polished with floor wax In this way, a bright and clean floor paint floor is made However, it must be noted that the wet cement floor should not be painted with floor paint, because the paint layer will be damaged when the putty is damped Putty should be used and adjusted as needed to avoid solidification and waste Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,