Paint knowledge | how to paint furniture well

Core tip: some friends don't like furniture to maintain its true color Some friends doubt that the paint furniture they bought is not environmentally friendly and want to paint furniture by themselves How to paint furniture well? What are the furniture painting process? Correct painting furniture is not only for the sake of beauty, but also for the sake of protecting furniture and our health Preparatory work: clean the site to make the site free of rubbish, sand and stone and clean environment The construction site is required to be bright, well ventilated and free of open fire （1） Construction process of clear water paint 1 White stubble surface treatment: if there is dust, stain, glue stain, pencil track, etc on the wood surface requiring oil decoration (the veneer is sealed with primer once), it must be treated Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Paint Home News: some friends do not like furniture to maintain its true color, some friends doubt that the paint furniture bought is not environmentally friendly, want to paint furniture by themselves How to paint furniture well? What are the furniture painting process? Correct painting furniture is not only for the sake of beauty, but also for the sake of protecting furniture and our health Preparatory work: clean the site to make the site free of rubbish, sand and stone and clean environment The construction site is required to be bright, well ventilated and free of open fire (1) clear water paint construction process 1 White stubble surface treatment: if there is dust, stain, glue stain, pencil track, etc on the wood surface (the veneer has been sealed with primer) that needs oil decoration, it must be treated If the steam nail cap is exposed on the surface, it must be flushed into the wood surface for 1-2 mm 2 Brush primer: pay attention to the concentration of primer when brushing the primer When brushing, brush twice evenly from top to bottom and from left to right along the wood grain Avoid oil accumulation and sagging during brushing The primer shall be brushed more than four times (excluding the back cover) 3 Putty plugging: after the primer is brushed once, the holes and seams of the steam nails can be blocked The putty is prepared by mixing lithopone and water quality pigments according to the color of the decoration panel When applying the putty, it is required to apply the putty fully and highlight the wood surface as the surplus of dry shrinkage sanding 4 sanding: after the putty is dry, use 360 water sanding paper for sanding During the operation, the force shall be even and the exposed bottom shall not be worn through Special attention shall be paid to the external corner If the exposed bottom is worn through, it shall be timely toned and repaired 5 Spray the top coat: 1) before spraying the top coat, clean the site and sprinkle water on the ground to ensure that there is no dust in the air 2) Filter the finish before spraying 3) Before spraying the top coat, the bottom coat surface shall be polished in place with 360 water abrasive paper and soapy water The top coat shall be sprayed for more than two times, and the distance between the spray gun and the panel shall be appropriate to prevent the panel from being attached by vapor mist 4) The wall protection shall be done well for the spraying of finish paint, and the doors and windows shall be opened for ventilation at the same time It is strictly prohibited to light open fire on site 5) After the finishing coat is sprayed, the surface of the paint film shall be smooth, soft, uniform in color, free of sagging and wrinkle After finishing coat spraying, the joint between the paint surface and other parts shall be clear and eye-catching, with clear edges and corners 6) After the finishing coat is sprayed, the dripping and polluting walls, sheds, floors and windowsills shall be cleaned quickly （2） Construction process of mixed water paint 1 White stubble surface treatment shall be carried out according to the construction process of clear water paint 2 The mixed water paint process must be done on the facing plate, and it is not allowed to mix oil directly on the sandwich plate surface 3 The surface of wood mixed with water paint can be applied with putty mixed with white powder, white emulsion and water 4 The putty shall be polished after drying, and the polishing method shall refer to the polishing process of clear water paint 5 After the working surface is polished, the transparent putty can be diluted and sprayed once 6 The primer and finish of the mixed water paint can be applied by spraying, and the construction process shall refer to the clear water paint process （3） Color rubbing surface coloring construction process 1 Before using oily color rubbing treasure for construction, the color card and color code shall be brought to the customer for confirmation and signature on the spot before construction 2 Before rubbing, the wood surface shall be brushed with primer once, and the rubbing shall be carried out from top to bottom and from left to right The rubbing shall be uniform and delicate, and it is not allowed to be exposed 3 Before the surface coloring construction, the color code shall be made in advance for manual color matching, which shall be kept in the file after being approved and signed by the customer The professional personnel shall prepare the surface coloring finish according to the color code and the construction quantity, purchase the finished color paint, and the color card shall also be approved and signed by the customer before filing 4 When painting the finish paint, the construction personnel shall be quick in hand and quick in action When painting the multi-dimensional surface, a working surface shall be set aside with newspaper for spraying, which shall be repeatedly alternated to avoid the deep tone of internal corner caused by repeated spraying (if there is uneven paint color, the color shall also be repaired) 5 The paint film shall be saturated, with uniform color, without sagging and wrinkle Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,