echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Paint knowledge | introduction to latex paint construction process

    Paint knowledge | introduction to latex paint construction process

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: I believe you all know that latex paint is the mainstream paint for wall treatment, which is welcomed by everyone Latex paint construction technology is also very particular, a wrong step will affect the quality of its decoration Now let's introduce the latex paint construction technology for you Latex paint construction technology introduction: latex paint construction technology: rough wall - brush 1 time of interface agent - crack treatment - leveling (including internal and external corners straightening) - pasting - scraping 2-3 times of putty - polishing - primer - mending and polishing (primer must be used for the place to be mended again) - two times of finish paint - curing Protect Specific steps of latex paint construction process: 1 Paint agent, top 10 Chinese wall paint brands Recommended introduction: interior wall paint and exterior wall paint can achieve beautiful, clean and pleasant effects, but the effects in different environments are different, so the color of the paint will be different There are ten brands of Chinese paint, ten brands of global paint, ten brands of Chinese wall paint, and ten brands of Chinese paint, Famous trademark of Chinese paint and coating In private rooms, most of us choose according to our own personality, personal hobbies and living habits The younger generation will choose the interior wall paint with rich colors and bright colors, while the older ones will have some working experience Paint Home News: I believe you all know latex paint, is the current wall treatment of the mainstream paint, welcomed by you Latex paint construction technology is also very particular, a wrong step will affect the quality of its decoration Now let's introduce the latex paint construction technology for you Latex paint construction technology introduction: latex paint construction technology: rough wall - brush 1 time of interface agent - crack treatment - leveling (including internal and external corner straightening) - cloth - scrape 2-3 times of putty ——Grinding - primer - mending grinding (the place to be mended must be applied with primer one more time) - two finishing coats - curing The specific steps of latex paint construction process: 1 Interface agent: the interface agent must be brushed to and even 2 Cracks: generally, use kraft paper tape and white emulsion to stick the cracks (but it can not be guaranteed that 100% will not crack again) 3 Leveling: the uneven wall needs to be leveled, generally gypsum is more commonly used, and the concave convex difference is not more than 0.5cm 4 Pasting: generally, non load-bearing walls such as light body walls and thermal insulation walls need to be pasted Try to choose a better quality wall cloth and white emulsion If possible, grid cloth can be used, which will have a better anti cracking effect 5 Putty: it is better to choose the putty with high particle fineness and hard texture, or add a certain amount of white emulsion in the putty to improve the hardness of the putty 6 Sanding: try to use fine sandpaper, generally use 400-500 sandpaper for soft putty, 360-400 for hard putty (such as wall lining, easy to crack flat) If the sandpaper is too thick, it will leave deep sand marks, which cannot be covered by painting After polishing, the wall must be cleaned thoroughly to avoid too much dust, affecting the adhesion of the paint The concave convex difference shall not exceed 3 mm 7 Primer: the primer must be brushed evenly to ensure that every part of the wall is brushed If the wall has a large amount of paint, it is better to add a little more water to the primer to ensure that it can be brushed evenly Don't think it's better to use a roller with poor primer, the effect of primer painting will directly affect the effect of the top coat, and the roller with the same texture as the top coat should be used 8 Mending: after the putty is polished, there will be some defects (pits) left Generally, it is difficult to see them clearly Only after one coat of paint, it will be obvious At this time, mending is needed Pay attention to the flattening of mending, and then brush the primer with a little more water to avoid color difference due to different water consumption with other walls 9 Maintenance: 4 hours after the latex paint is applied, it will dry, but the dry paint film has not reached a certain hardness, which needs to be treated, very simple, no scrubbing or any contact with the wall within 7-10 days For the inspection of its decoration quality, you can use a light bulb to observe from the four corners of the wall, and it is clear whether the painting is even After the putty is applied, when it is completely dry, apply the wall sealing primer matched with the selected emulsion paint, and then apply the top coat The primer and finish can be slightly diluted to avoid brush marks Each coat of paint shall be allowed to dry completely before the second coat is applied Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.