Paint knowledge | K11 waterproof coating characteristics K11 waterproof coating construction method

Core tip: the most popular waterproof coating on the market is K11 waterproofing coating, which is composed of high quality acrylic emulsion and various additives It is made of high quality cement, selected graded quartz sand and a very active polymer powder It is made of two component waterproof materials Product advantages: 1 Fast drying speed, short construction period 2 Good flexibility, strong adhesion with the base 3 Excellent water resistance and excellent weather resistance 4 Decorative layer can be directly pasted after the waterproof layer is dry and solid 5 Construction is convenient, and it can be constructed on wet base 6 It can resist the erosion of carbonate and chloride ion Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coatings home: the most popular waterproofing coating on the market is the K11 waterproofing coating, which is composed of high quality acrylic emulsion and various additives It is made of high quality cement, selected graded quartz sand and a very active polymer powder It is made of two component waterproof materials Product advantages: 1 Fast drying speed, short construction period 2 Good flexibility, strong adhesion with the base 3 Excellent water resistance and weather resistance 4 Decorative layer can be directly pasted after the waterproof layer is dry and solid 5 Construction is convenient, and it can be constructed on the wet base 6 It can resist the erosion of carbonate and chloride ions, and effectively avoid the phenomenon of Pan alkali 7 Green and environmental protection It is non-toxic and harmless, and can be directly used in drinking water pools and fish pools The scope of application: 1 Indoor and outdoor waterproofing: kitchen, toilet, balcony, wall, ground 2 Construction methods of food pools, swimming pools, fish pools, sewage treatment pools 3 Basement, warehouse, underground parking lot, subway station, tunnel and so on: 1 Foundation surface treatment: the foundation surface must be solid, clean, flat and wet; If there are defects such as pores and cracks on the base surface, the cement mortar shall be used to repair and trowel in advance; the internal and external corners shall be made into half round corners with a spatula; the base surface shall be fully wet, but there is no clear water 2 Mixing and mixing: pour the additive into the container according to the mixing ratio, and then slowly pour the powder into the additive, and at the same time, fully mix it to a uniform mortar shape without particles for use; In the process of use, it is necessary to keep intermittent mixing to prevent stratification and sedimentation If the slurry is too thick or the brush can be properly added with not more than 5% of the total water, stir evenly and then use Mixing ratio: liquid material: powder material = 1:1.5 (weight ratio) 3 Construction: brush directly on the base surface with brush or roller brush, with even force, without missing brush; if it is used for moisture-proof, only one layer needs to be painted; if it is used for waterproof, two to three layers need to be painted When the first layer is dry and firm until it is not sticky (generally 1-2 hours), the second layer can be brushed, and the brushing direction of each two layers should be perpendicular to each other 4 Coating protection: after the slurry construction is completed, the coating must be protected before it is completely dry and fixed, including pedestrian, rain erosion, exposure to the sun, sharp object damage, etc.; after the coating is completely dry and fixed, no special protective layer is required 5 Coating Maintenance: after 24 hours of coating construction, it is recommended that the coating should be covered with wet cloth or spray spray to maintain the coating for 2-3 days The air humidity will be longer and the time of dry ventilation will be longer In the opposite direction, the air circulation is especially poor 6 Inspection (closed water test): the toilet, pool and other parts shall be filled with water for 48 hours after the waterproof layer is dried and fixed (at least 24 hours in summer and 48 hours in winter) to check whether the waterproof construction is qualified Water spraying test shall be conducted for light wall Reference dosage: generally, the thickness of waterproof membrane is 1.0mm, and the dosage is about 1.5-2.0kg/m2 The actual dosage is determined by the use, use position, base roughness, environmental factors, etc Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,