Paint knowledge | what is the cause of the floor paint particles? What are the prevention methods?

Core tips: answer: 1 Floating dust in the air of the construction site; (easy to be ignored) 2 Dust on objects in the construction site and dust on the constructors; 3 Particles in the paint; 4 Unclean coating tools and containers; 5 Impact of temperature (too high or too low), humidity (too high or too low) Prevention methods: 1 Let the floating dust in the air settle overnight, and then wipe it with a wet cloth 2 2 Wipe the dust on the object with a wet cloth The constructor shall change into clean clothes or clean the dust on his body before entering the construction site 3 After the paint is adjusted according to the proportion, 200 mesh filter shall be applied Several ways of roller coating Recommended introduction: roller coating includes rubber roller coating, insert plate roller coating and ceramic rubber roller coating The following is a detailed introduction of these three ways of coating The function of roller rubber coating is to increase the friction derivative between the conveyor belt and the cylinder surface during transmission, so as to reduce the friction coefficient of the conveyor belt on the cylinder surface, reduce the mutual wear of the sliding machine of the conveyor belt on the cylinder surface, improve the traction force during operation, and extend the service life of the conveyor belt and the electric roller One, three, six, 8385-7180 (V) rubber rollers are covered with diamond rollers and flat rollers, generally pure rubber plates The rubber coating of the inserted plate roller is divided into tile shell type roller and Paint Home News: A: 1 Floating dust in the air at the construction site; (easy to be ignored) 2 Dust on objects at the construction site and dust on the constructors; 3 Particles in the paint; 4 Unclean painting tools and containers; 5 Impact of temperature (too high or too low), humidity (too high or too low) Prevention methods: 1 Let the floating dust in the air settle overnight, and then wipe it with a wet cloth 2 2 Wipe the dust on the object with a wet cloth The constructor shall change into clean clothes or clean the dust on his body before entering the construction site 3 After the paint is adjusted according to the proportion, it shall be filtered with 200 mesh filter screen 4 Painting tools and containers shall be kept clean 5 The temperature and humidity shall be controlled within the proper construction range (250, 75% is appropriate) coatings home is focused on coatings, diatom mud, paint coating, coating process, news and coating of fire retardant coating, diatom mud, paint coating, coating process, decoration knowledge and decoration effect map of fire retardant coating,