Paint Spray Notes Six tips for wood paint spraying

China Paint Online News Information
the correct coating construction methods can let the paint play professional performance, as far as wood paint, want to get good results must pay attention to the construction method, here to introduce the six tips of wood paint construction.
wood paint construction know-how one: dusting in advance. First of all, the wood surface polished flat, treatment of floating ash, cleaning can be used with a special dust cloth, large areas (such as ground version) with vacuum cleaner repeated vacuum.
wood paint construction know-how two: varies from material to material. Understand the wood, if it is hard wood (such as teak, birch, Bengalis) should be careful to use putty, foam water, etc. to beat the bottom so as not to cause color change and affect adhesion. Hard wood, want to get the best results, directly brush paint, if you need to fill the gap, it is recommended to use paint and fine wood powder stirring evenly to fill;
wood paint construction tips three: preparation. When painting, the environment and brush tools must be clean, operators should wear clean work clothes, wear clean work caps.
wood paint construction know-how four: coating grasp. Brush paint should be thin not thick, can be thin layer multi-channel, do multi-layer coating construction, each brush should be left to the lower layer after drying out the construction, and every time to polish.
wood paint construction tips five: temperature-appropriate construction. When the temperature drops below 5 degrees C, it will prolong the drying time, and the low temperature will produce white fog or lighting phenomenon, so should avoid construction in this case;
wood paint construction tips six: humidity grasp. When the ambient humidity is greater than 85%, it is not appropriate to construct, otherwise it is easy to produce paint film whitening and other ills.
。