Points for attention of high speed pulverizer

High speed crusher in use, is not the same as the general crusher The high-speed crusher is to check whether there is any foreign matter in the crushing chamber (it must be empty before starting), and connect the power supply Tighten the butterfly nuts of the upper cover and crushing chamber After starting the motor, turn the machine idly for 1-2 minutes, and then gradually feed the punched materials from the feeding plate, which should not be too fast or too much If the material is stuck and the motor doesn't rotate, please close it immediately to avoid burning the motor It can be used again after the material stuck is removed It is strictly prohibited to open the upper cover and reach into the crushing chamber by hand during use During the operation of the machine, the current shall not be greater than 15 a In addition, the high-speed pulverizer is a dry pulverizer, which is not suitable for crushing wet and greasy materials.