Possible failure of discharge valve and its elimination
-
Last Update: 2009-04-06
-
Source: Internet
-
Author: User
Search more information of high quality chemicals, good prices and reliable suppliers, visit
www.echemi.com
Possible failure cause elimination method of failure flange connection part leakage flange connection bolt not tightened or not evenly tightened Tighten the bolts evenly again The gasket fails Replace the gasket Remove the dirt between the flange sealing surfaces Clean the flange If the packing box leaks, the packing is not loose or the packing gland deviates, the packing gland shall be pressed evenly and the packing fails to be replaced with new packing Leakage of sealing surface, dirt between sealing surfaces, cleaning of sealing surface, damage of sealing surface, regrinding The valve rod does not rotate flexibly The packing pressure is too tight Adjust the tightness of the packing There are sundries between the valve rod and the valve rod nut The thread is damaged Disassemble and clean or repair the damaged part of the electric device, and check and repair according to the instructions
This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only.
This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of
the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed
description of the concern or complaint, to
service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content
will be removed immediately.