echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Precautions for installation of explosion-proof high and low temperature cold and heat cycle machine

    Precautions for installation of explosion-proof high and low temperature cold and heat cycle machine

    • Last Update: 2022-06-19
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    The flameproof high and low temperature cold and heat cycle machine uses refrigeration or heating to obtain high and low temperature circulating fluid.
    Then, what should be paid attention to when installing Wuxi Guanya equipment?
    1.
    When installing the flameproof high and low temperature cooling and heating cycle machine, attention should be paid to the dust and impurities in the refrigerant pipeline, which will reduce the cooling effect of the flameproof high and low temperature cooling and heating cycle machine, and increase the compressor of the flameproof high and low temperature cooling and heating cycle machine.
    The wear and tear will cause the blockage of the flameproof high and low temperature cooling and heating cycle unit, which will affect the cooling effect

    .

    For refrigerant piping, watch out for leaks in the refrigerant piping
    .

    If leakage occurs, it will reduce the overall cooling effect of the explosion-proof high and low temperature cooling and heating cycle machine
    .

    During this period, the long-term overheating operation of the compressor will easily reduce the service life of the flameproof high and low temperature cooling and heating cycle machine
    .

      2.
    When installing the flameproof high and low temperature cooling and heating cycle machine, if the circuit is improperly installed, it will accelerate the damage of electrical components, and may even cause the unit to operate in confusion, which cannot be controlled individually or centrally, and the flameproof high and low temperature cooling and heating cycle machine system cannot be operated.

    .

      3.
    When installing the flameproof high and low temperature cold and heat cycle machine, the outside of the equipment must be unobstructed within 1 meter, and all landing feet must be installed with shock-absorbing blocks to ensure the normal operation of the flameproof high and low temperature cold and heat cycle machine

    .

    If the explosion-proof high and low temperature cooling and heating cycle machine is improperly installed, the air flow will often be short-circuited, and the action of the protection switch caused by the short-circuit of the air flow will affect the surrounding environment
    .

    Therefore, attention should be paid to the installation of the flameproof high and low temperature cooling and heating cycle machine to avoid improper installation and the above failures, and strive to make the flameproof high and low temperature cooling and heating cycle machine operate effectively
    .

    4.
    The explosion-proof high and low temperature cold and heat cycle machine will produce condensed water during the refrigeration process.
    Whether the condensed water can be discharged smoothly after generation will affect the installation of the explosion-proof high and low temperature cold and heat cycle machine.
    The condensate water pipe is connected from the indoor unit to the outdoor or When the floor leaks and the condensate pipes are insufficiently drained, the unit will leak water, resulting in a short circuit of the power supply

    .


    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.