Precautions for operating oral liquid filling and capping machine

Oral liquid filling machine capping machine is suitable for filling and sealing 30-500ML series glass bottles and plastic bottles
.

The equipment uses a reciprocating piston for filling, electromagnetic oscillation for capping, and can be capped (metal type) or capped (plastic cap) for sealing
.

 What should be paid attention to when operating the oral liquid filling machine, the following briefly introduces a few points
.

1.
Whenever the machine is adjusted, in fact, tighten the loosened screws, and use the crank handle to turn the machine to see if its action meets the requirements before driving
.

2.
When adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to remove parts to avoid damaging the parts or affecting the performance of the machine
.

3.
Because this filling machine is an automatic machine, the dimensions of the easy-to-pull bottle, bottle pad and bottle cap are all required to be unified
.

 　　4.
Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation
.

 　　5.
The machine must be kept clean.
It is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine.
Therefore, it is necessary to: