Precautions for the operation of screw dispensing machine

Screw dispenser is a kind of dispensing equipment commonly used in the powder needle production line, using a special design of large diameter screw dispensing powder, its loading capacity is accurate and can adapt to a variety of different viscosity of the drug, single screw can complete a variety of loading, a wide range of loading, accurate loading, high efficiency of buckling, suitable for a wide range of bottles, the original has a reverse bottle, no bottle, automatic parking alarm device
.

It is used for the dosing and dispensing of powders, mainly used for the dispensing and compression of antibiotics in the pharmaceutical industry
.

The use of single-head continuous powder, special design of large diameter screw sub-charge powder, its loading is accurate, according to the plug mechanism using a disc type stopper, according to the plug accurate and reliable, the use of computer control, touch screen Chinese menu display, CNC motor control circuit is stable and reliable and has automatic powder loading, stopper, inverted bottle automatic discharge, no bottle no powder function
.

The cleaning, loading and unloading, adjustment of each component is simple and easy to
maintain.

In the production of powder needles, it can be linked into a line
with ultrasonic bottle washing machines, tunnel ovens, high-speed capping machines and other equipment.

Precautions for the operation of the screw dispenser: 1, check the sterile room temperature and humidity, wind pressure and make a record, if it is not normal, immediately notify the workshop director and QA and deal with it in time, and then notify the dispensing post to start
up after normal.

2.
After the RAW material powder is irradiated by the transmission window, the surface of the raw material powder container is scrubbed with
75% alcohol.

3.
Check the batch number and weight of raw materials before use, and check the accuracy
of the calculation of standard loading.

4.
Check the clearance certificate before production, and only after the qualification is approved by QA can it be produced
.

5.
Before the formal dispensing, check the rubber stopper, the visible foreign body and appearance of the bottle, and can only be used after passing
.

6.
Confirm that the 100-level laminar flow cover and automatic dehumidifier have been turned on and the equipment is running normally
.

7.
Check that the vacuum and compressed air indications should be normal
.

8.
It must be operated under empty load for several minutes before feeding, and abnormal situations must be reported
immediately.