Precautions for the use of a single disc counting machine

Introduction: single disk tablet counting machine is mainly used in pharmaceutical, hospital, food and other industries to count small and medium-sized batch production of drugs or food, such as capsules, tablets, granules, etc The machine is small in volume, light in weight, accurate in counting and simple in operation It is an ideal special equipment for the counting of bottled, bagged and canned products in various industries Technical parameters of single disk tablet machine: diameter of counter plate: 400mm / 580mm production capacity: 12-26 pieces / minute 14-40 materials / minute motor power: 550W electric pressure: 220V applicable capsule: 0-5 × machine size: 450 × 650 × 700mm 550 × 650 × 800mm machine weight: 50kg / 65kg Instructions for single disc chip counting machine: 1 Use method 1 Connect the power supply and use the motor to rotate in the same direction as the identification direction 2 Put in the capsule or tablet, turn on the power, adjust the pressure regulating switch to the appropriate position, so that the several holes in the several discs are filled in the required time 3 When bottling, place the bottle at the discharge port of the machine, gently upward until it touches the contact switch, so that the number of discs can rotate 2、 Note 1 Capsule including other raw materials shall not work after being damped 2 The part of the pelletizing disc shall not be heavily pressed, otherwise it cannot work normally.