Precautions for using vertical packing machine

In the last article, I introduced the operating procedures of vertical packaging machine for you Now I would like to introduce the precautions for you when using the vertical packaging machine: 1 The operator must be proficient in the operation process according to the correct sequence, otherwise it may cause machine failure 2 During the operation of the machine, pay attention to whether the sound of the machine is normal, whether the temperature is normal, whether the packaging film is used up, and whether the materials are used up Operators shall not leave the packaging machine in the production process, and stop the machine for inspection in time in case of any problem 3 Remember the original size and position when adjusting each mechanism, so as to restore to the original starting point when the adjustment is not ideal 4 The running in of the new machine must be operated at a slow speed for 100-150 hours 5 Do not put tools and foreign matters on the machine to prevent falling into the mold and damaging the mold 6 When the work is suspended, the sealing mould must be disengaged by inching 7 After working for a long time, the mold surface shall be cleaned with a special copper brush, which is conducive to the sealing quality 8 It is forbidden to place hands or objects near the moving parts during the operation of the machine 9 Regularly check whether the fastening parts of the machine are loose or disconnected 10 The engine oil (36 × 3) of the gearbox shall be changed once every 3 months, and the center line of the oil standard shall prevail each time.