Precautions for water-based metallic paint construction!

As people's aesthetic level and requirements for art are getting higher and higher, metallic paint is becoming more and more popular

One, the choice of putty

For coating with water-based metallic paint, the corresponding and high-strength putty paint should be selected according to the application requirements

2.

1.

2.

Three, the treatment of the base surface 

1.

2.

3.

Fourth, the key points of the metal paint construction process

1.

2.

3.

Five, the main points of the overall construction 

1.
Before spraying (rolling) metallic paint, first conduct self-inspection on the previous process, and apply metallic paint after acceptance
.
 

2.
Pay attention when spraying (rolling) metallic paint.
You must spray the cross thinly for multiple times and form at one time.
It is best to choose a DC spray gun.
The flow rate should not be too large.
The paint output is uniform and natural, so that the spray range is uniform.
Joint and close the gun
.
 

3.
It is recommended to choose medium and short hair rollers for roller coating construction.
Wet-to-wet lap joints should be used.
The material should be evenly collected to ensure uniform color after spraying (rolling), without bleeding through the bottom, and full paint film
.
When paint film defects such as chromatic aberration and peeling appear on the painted surface, the entire partition should be repaired
.
 

4.
Due to issues such as flatness and difficulty in construction, it is not recommended to make flat effects for all metallic paint effects
.
 

6.
Material storage method

1.
The lid of the bucket should be tightly closed during or after construction to prevent skin formation and placed in a cool, non-freezing place
.
When the temperature is too high, try not to construct on the wall exposed to direct sunlight to avoid stubble marks due to rapid drying
.

2.
The tools after use should be washed with water and dried for later use
.
Do not pour the used paint back into the original packaging
.