echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Problems in the construction of the "divided lines" of water-in-water and sand-in-water colorful paints and the division techniques

    Problems in the construction of the "divided lines" of water-in-water and sand-in-water colorful paints and the division techniques

    • Last Update: 2021-03-22
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    The stone-like properties of colorful stone-like paint should be composed of paint surface and concave-convex surface or grid lines.

    Colorful imitation stone lacquer sand-in-water, water-in-water simulation degree requires a stable finished paint, the particles in it must be transparent, textured, and match the color of the imitation stone properly, and the spray gunner must have the skill to operate on the wall.
    Before spraying, the gunner must spray the model, which is consistent with the factory standard model before construction on the wall.


    The fidelity of the liquid colorful imitation stone lacquer, sand and stone imitation effect, is a task that is done by the combination of the colorful paint and the gunner.


    PART 1/Strong stickiness, masking paper is easy to break

    Reason: After the middle coat of imitation stone paint is dried, there will be a large amount of emulsion in the middle coat, and the emulsion will penetrate slightly when adhering to the textured paper, which will affect the tensile strength of the textured paper and the viscous com" href="http://">coating online coatingol.
    com .

    Solution: After the intermediate coating is sprayed, remove the textured paper in about 30 minutes under suitable temperature conditions.

    PART 2/The black paint was taken up, and the grid line was broken

    Reason: Masking paper is more viscous than external wall putty powder, causing the black paint and putty powder to be taken up by the masking paper as a whole.

    solution:

    1.
    To increase the strength of putty, "putty flushing maintenance" must be in place;

    2.
    After the black paint is dried, paste the masking paper for protection;

    3.
    Use better quality textured paper for construction.

    PART 3/The paint film is damaged, and there is water seepage at the edge

    Reason: After the middle coat of the imitation stone paint is dry, the paint film is thicker and more flexible.
    When the textured paper is torn off, the integrity of the imitation stone paint film is destroyed.
    When the heat swells and expands, the paint film and the putty layer expand and contract.


    The ratio difference is large, which causes the edge of the ruled line to start to be warped and stratified.


    solution:

    1.


    2.



    General outline of construction essentials for "divided lines"

    1.



    2.



    3.



    4.



    5.


    6.
    Grid shape

    In order to make the effect of the exterior wall less rigid, try not to choose square grids during the colorful paint construction, such as horizontal and long grids, vertical grids, and "I" grids are all a good choice.
    However, the use function of the building should be considered.
    For business units, office buildings should choose a more stable grid design, and residential, shopping malls, schools, gyms, etc.
    can choose a more lively grid plan.

    7.
    Grid position

    In order to make the spraying effect of the colorful paint closer to the stone, in principle, the same divisions as the stone can be used, such as the Yin and Yang angle division, the window division, and the building edge division.
    However, considering the limitations of the stone, the division of sand in water can not be divided into the yin and yang corners.
    It is recommended to divide the division on the side of the window, and be careful not to appear small pieces and small edges as much as possible.

    8.
    The size of the grid

    A reasonable division should be made according to the height of the building.
    Generally, the high-rise division should be 1.
    5-2 square meters, the multi-storey division should be controlled between 1-1.
    5 square meters, and the low-rise division should be within 1 square meters.

    9.
    The width of the split seam

    According to the size of the grid area, the width of the grid seam should be reasonably designed.
    Generally, it should be between 0.
    8-1.
    5cm.
    It can also be designed as a horizontal width, vertical narrow, and horizontally narrow grid effect, but try to control the width of the grid seam.
    Within 2 cm.

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.