echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Procedure description of semi-automatic pre filling machine

    Procedure description of semi-automatic pre filling machine

    • Last Update: 2018-03-19
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    The semi-automatic pre filling machine can prepare a powder square plate with a bottom area of 500 × 500mm2 and a height of about 10 mm on four sides, which is filled with powder, and place the connecting plate of powder filled capsule shell in the powder square plate Then cover the plexiglass frame matched randomly on the powder filling capsule connecting plate, put the powder into the frame with a small bucket shovel, and fill the powder with a scraping on the edge of the frame, and scrape off the excess powder Use the capsule cap cover set plate (as shown at the end of the figure, there are round holes on the set plate), put it on the capsule cap cover joint plate, with alignment holes, easy to place Turn over the capsule cap connecting plate, make the opening of the capsule face down, and cover it on the powder loaded capsule shell connecting plate, which also has a contraposition hole, so it is easy to cover Put the assembled capsule plate into the cavity under the "capsule cap forming plate", pull down the "pressing rod" with your hand and put it in place, do not need to be careful of excessive force, because there is a positioning mechanism to control the pressing height Take out the sheathed capsule plate, pour out the capsule, and fill it You can cycle to the next board Operation steps of semi-automatic pre filling machine: press the green button in the "power switch" to turn on the power Slowly adjust the "vibration strength adjustment knob" and turn it clockwise At this time, the finishing disk, which is connected with the "vibration support", starts to vibrate Touch the finishing disk with your hand and adjust the vibration strength according to your feeling Put the powder filled capsule shell into the "powder filled capsule shell finishing disk", about 300 capsules each time Put the capsule cap into the "capsule cap finishing plate", about 300 capsules each time The finishing plate is made of plexiglass plate, on which there are many circular holes with big upper and small lower funnel shape, the diameter of which corresponds to the diameter of capsule number At this time, the capsule shell of the working platform plate moves stably and slowly, so that it can enter the hole of the platform plate one by one In about 30 seconds, the powder filled capsule shell and capsule cap fall into the round hole with the opening facing up If the individual opening is facing down, the capsule cap can be used to press the sleeve down gently, and then the sleeve can be pulled out Horizontally hold the connecting plate of powder loaded capsule shell, push it in the lower part of the finishing plate, the powder loaded capsule shell in the finishing plate will fall into the circular hole of the connecting plate, and then take out the connecting plate In the same way, take out the capsule cap with the capsule cap connecting plate The main performance and characteristics of semi-automatic pre filling machine, wide range of packaging: applicable to all kinds of state, properties of powder Convenient operation: PLC control and man-machine interface operation system are adopted to make the operation intuitive and convenient Easy to adjust: the variety change will be completed in about ten minutes Suitable for different types of packaging bags, perfect prevention system, ensure the rate of finished products, do not waste bags and materials The packaging part of the automatic powder filling machine is made of stainless steel, which ensures the health and safety of the material and conforms to GMP standard High degree of automation: unmanned in the whole process of weighing and packaging, automatic alarm in case of failure Some of them are imported engineering plastics, no need to refuel, so as to reduce the pollution of materials Adopt oil-free vacuum pump to avoid polluting the production environment The waterproof design can wash with water, reduce the difficulty of cleaning and improve the service life of semi-automatic pre filling machine.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.