Sanitary napkin absorption speed tester Brand advantage performance reliable Shanghai Huitao

Sanitary napkin absorption rate tester Specific parameters are as follows: (1) Standard test module: size Wei (76 ±1) mm X (80±1) mm, mass (127.
0±) 2.
5g; (2) Curved specimen holder: length (230±1) mm, width (80±) mm; (3) automatic dosing device: dosing amount of (5.
0±0.
1) mL, discharge speed less than or equal to 3s; (4) automatic timer: resolution of 0.
01s.
(5) test material: standard synthetic test solution , distilled water or deionized water detection principle: sanitary napkin sticks to the curved specimen seat of the absorption rate test race, the standard test module is placed in the absorption area of the sample surface, the automatic dosing device will add a certain volume of standard synthetic test liquid to the standard test module, and the timer records the time when the sanitary napkin completely absorbs the standard synthetic test solution, indicating its absorption rate
.

The parts and materials supplied have been inspected and tested to ensure that they are free of defects and defects, and they will work
properly when properly installed and operated on manufactured instruments.

The warranty period for parts (excluding consumable parts such as light sources, optical components, friction cloths, etc.
) is 6 months
from the beginning of the shipping period.

This warranty supersedes any other warranties
, express or implied.

In any event there is a responsibility and obligation to be liable
for any special or consequential damages resulting from a breach of this warranty.

Liability is limited to the repair or replacement of any defective parts that arise during delivery on board and at the
factory.

Damage to parts due to abuse, improper use, accident, alteration, neglect, unauthorized repair or installation will not be warranted
.

The determination of defects and the causes of the defects shall be decided in the final direction
.

reserves the right to make changes and improvements to its products, but is not obligated to perform improvements and installations on products already manufactured
.

Operating EnvironmentThe instrument is used in residential, commercial and light industrial environments, in accordance with the standard menstrual pants 39391 and BS EN 50081-1 and BS EN50082-1 climatic environment The right to change and improve its products, but is not obligated to perform improvements and installations
on the products already produced.

This instrument is operated under the following conditions: altitude <2000m, operating temperature: 13 ~ 30 °C (56 ~ 86 °F), relative humidity 25 ~ 75%, storage temperature: 10 ~ 43 °C (50 ~ 110 °F), relative humidity 20 ~ 80%.


The instrument can be placed in the operating environment required by the standard in order to allow for operational consistency between specimen humidification and actual wear tests
.

Electrical Information: The electrical requirements for this instrument comply with EN 61010-1:2001 for measurement, control and laboratory use
.

Installation type and pollution level: installation category I.
, pollution level 1 Shanghai Chengsi Intelligent Technology Co.
, Ltd.
is a professional production, research and development, sales of a manufacturer is the quality of our respective holdings of the Fangshi, we will sell post-service as one of the professional companies, "safe and high-quality, efficient and reliable" service solemn Yongnuo; 1.
The instrument warranty period is one year, and the product mountain can be responsible for free warranty (including installation
) during the warranty period.

Training, technical consultation) due to our reasons caused by equipment damage free of charge, and assume all responsibility, and ensure that after receiving the notice, rush to the scene within 48 hours to deal with the problem, such quality problems warranty period is also extended accordingly; 2.
The products supplied by our company are provided by me or authorized first-level service providers to be responsible for free installation, commissioning and technical training and consulting work for operators 3.
We can take centralized training ingredients to the user's installation training in accordance with the requirements of the purchaser such as personnel training, product products, and maintenance methods
.

Can be guaranteed by the manufacturer (Shanghai Chengsi Intelligent Technology Co.
, Ltd.
) and a first-class repairer or investment right repairer to provide three-level service system guarantee: 4.
I can provide lifelong maintenance services for products outside the warranty period, maintenance only charges spare parts cost fee 5, installation and maintenance strictly in accordance with the requirements of the after-sales service process, fill in the corresponding records 6, the company provides sufficient spare parts, accessories and consumables for various types of equipment, and guarantees that it is the product produced by the original factory, in order to meet the needs of the normal operation of the equipment The company provides enough commonly used maintenance equipment and Chinese operation and maintenance manuals free of charge, the specific content can be found in the packing list of the instrument: the personnel provided by the negative training have undergone strict technical training and have more than 5 years of experience in the use and maintenance of similar products