Selection and purchase of diatom mud: raw material blending method before diatom mud construction
-
Last Update: 2020-04-03
-
Source: Internet
-
Author: User
Search more information of high quality chemicals, good prices and reliable suppliers, visit
www.echemi.com
Core tip: the rise of diatom mud has attracted the attention of many consumers Some people are also interested in the construction of diatom mud: how can diatom mud be mixed without glue on the wall? Today, Xiaobian will explain this problem to you The raw material blending method before diatom mud construction (picture from the network) generally, the wall material of diatom mud is 10kg / bag, which is divided into dry powder material, fine sand texture material and coarse sand scraping material Add water according to construction texture The specific methods are as follows: 1 First, clean the white milk rubber barrel, use a 1.5-liter drink water bottle as a measuring cup (it is better to use a special measuring cup), and pour clean water into the white milk rubber barrel Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Home of coatings news: the rise of diatom mud has attracted the attention of many consumers Some people are also interested in the construction of diatom mud: how can diatom mud be mixed without glue on the wall? Today, Xiaobian will explain this problem to you The raw material blending method before diatom mud construction (picture from the network) generally, the wall material of diatom mud is 10kg / bag, which is divided into dry powder material, fine sand texture material and coarse sand scraping material Add water according to construction texture The specific methods are as follows: 1 First, clean the white milk rubber barrel, use a 1.5-liter drink water bottle as a measuring cup (it is better to use a special measuring cup), and pour clean water into the white milk rubber barrel Re measure 1 bottles of water for final consistency Tip: how much water to pour should be accurate It is strictly forbidden to turn on the tap to directly pour water into the white emulsion rubber bucket, and determine the water volume based on experience Otherwise, because the water volume of each barrel is different, the color difference will appear 2 Add the standard amount of color paste, and then stir until the color paste is evenly distributed Note: not all color pastes can be compatible with materials The added color pastes must be the color pastes recommended by our company 3 Check whether the packaging bag is complete, remove the dirt on the surface of the packaging bag, and open the sealing of the packaging bag with scissors First, pour 70% of the material into the bucket slowly, and then use the mixer to stir After the dry powder and the color paste water are completely mixed, then pour the remaining material into the bucket, and continue to stir until the material becomes delicate paste (without granule or agglomerate) Tip: when the mixture is just mixed, it is viscous and laborious to mix In normal condition, it is only necessary to continue mixing; it is necessary to control the mixer to prevent material splashing; it is necessary to manage the sanitary environment of the construction site and conduct civilized construction 4 Mix for a few minutes before construction 5 For the remaining materials used on that day, please clean the edge of the barrel mouth and keep it sealed The next day, stir it again to continue to use The above five points are the raw material blending methods before diatom mud construction, hoping to help you understand the construction of diatom mud and further understand diatom mud Home of coatings focuses on the news and information of coatings, diatom mud, paint coatings, coating process, fire retardant coatings and coatings, paint coatings, coating process, decoration knowledge and decoration effect map of fire retardant coatings,
This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only.
This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of
the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed
description of the concern or complaint, to
service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content
will be removed immediately.