Selection of spray gun in metal powder coating
-
Last Update: 2020-02-21
-
Source: Internet
-
Author: User
Search more information of high quality chemicals, good prices and reliable suppliers, visit
www.echemi.com
Generally, friction spray gun is not suitable for spraying metal powder coating In most cases, it is recommended to use electrostatic spray gun for coating and half loading Due to the metal pigment contained in this type of product, good grounding of the system shall be ensured when using electrostatic gun for construction, and low electrostatic voltage and powder output shall be set to prevent ignition during spraying The effect of forming coating film has a great relationship with the setting, quality or brand of spray gun There may be a large amount of metal powder accumulated at the discharge needle of the spray gun after long-term spraying, which needs to be cleaned regularly by the constructor.
This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only.
This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of
the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed
description of the concern or complaint, to
service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content
will be removed immediately.