-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
"Leak detection is more accurate and efficient
.
" This is the evaluation
of the employees of the fourth department of Guangzhou Petrochemical Refining recently after using the water cooler leak detector created by Deng Shengfeng, an employee of the third unit of hydrorefining.
In order to ensure the safe production of the plant, the fourth refining department requires that the water cooler be checked
daily for leakage.
At the beginning, employees generally carry a small bucket, receive water from the water cooler drain, and after filling a bucket, stand still to observe whether there is oil on the water surface to judge whether the water cooler is leaking
.
This method of examination is time-consuming and laborious
.
Improving the inspection efficiency of water coolers has become one of the
four key research projects of oil refining.
Deng Shengfeng took the initiative to "unveil the leader"
.
Using the principle that oil is less dense than water, he began to make water cooler leak detectors
.
The materials used are all from waste materials, including buckets, ball valves, elbows, bicycle tubes, baffles, etc
.
The water cooler leak detector is mainly composed of
a separation chamber and a drainage chamber.
In use, the water cooler return water guide is connected to the leak detector inlet pipe, and the water enters the oil-water separation chamber from a low level, then enters the drainage chamber from the bottom of the separation chamber, and finally discharges
from the high outlet of the drainage chamber.
In this way, as long as there is oil, it will collect on the surface of the separation chamber, and it is easy to judge whether the water cooler is leaking
.