Shanghai Shenggang automatic oral liquid filling machine operating procedures

Shanghai Shenggang automatic oral liquid filling and capping machine is a device designed for bottled liquids above 10ML.
It adopts disc positioning type capping, capping, electromagnetic vibration capping, stable operation, reasonable design, oral liquid Filling and capping machines are widely used in pharmaceutical, food, chemical, health care products, pesticides and other industries
.

Manufactured in full accordance with the new GMP requirements
.

Operation instructions of automatic oral liquid filling machine: 1.
Because this filling machine is an automatic machine, the dimensions of easy-to-pull bottles, bottle pads and bottle caps are required to be unified
.

2.
Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation, and it can be confirmed that it is normal before driving
.

3.
When adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to remove the parts to avoid damaging the parts or affecting the performance of the machine
.

4.
Whenever the machine is adjusted, be sure to tighten the loosened screws, and use the crank handle to turn the machine to see if its action meets the requirements before driving
.

  　　5.
The machine must be kept clean.
It is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine.
Therefore, it is necessary to: ⑴ During the production process of the machine, remove the liquid medicine or glass debris in time
.

 　　⑵Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department
.

 　　(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blown with compressed air
.

 　　Precautions for the operation of the automatic oral liquid filling machine: 1.
After the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time
.

 　　2.
Install and adjust the feeding and discharging components according to the outline diagrams in this manual
.

 　　3.
Add new lubricating oil to each lubricating point
.

 　　4.
Use the crank handle to turn the machine to check whether the machine is running in the correct direction (counterclockwise when facing the main shaft of the motor).
The machine must be protected and grounded
.