Six maintenance problems of air compressor

Six problems often encountered in the compressor of air compressor: 1 The oil level of the cooling oil of air compressor is too low When the staff are doing patrol inspection, they should always pay attention to whether the oil level is lower than the inspection pipe If the oil level is lower than the inspection pipe, they should be supplemented in time; 2 The oil filter of the air compressor is too dirty, so that the air compressor oil can not enter the air compressor normally, which will lead to insufficient cooling oil and rapid temperature rise If the difference between the inlet and outlet is 0.18 MPa, the filter element should be replaced in time; 3 The air compressor is placed in an environment that is not conducive to ventilation, close to the wall or heated equipment, so that the air does not circulate, resulting in the temperature rise of the air compressor body, affecting the normal operation of the machine Therefore, the air compressor should be placed at the door or in a spacious place; 4 The fan belt of the air compressor is too loose or directly broken If the belt is too loose, it will directly slow down the rotation speed of the fan and affect the fan heat If the belt is broken, the air compressor will trip and stop after 5 minutes of operation, so the staff should pay more attention to the air compressor belt; 5 The compressor oil of the air compressor does not meet the requirements, which will lead to the temperature rise due to the lack of specific heat and the normal operation of the machine Therefore, we suggest that the original compressor oil of the air compressor must be used; 6 The air compressor cannot dissipate heat normally, which will affect the operation of the air compressor Therefore, the staff should clean the radiator in time and do a good job in the usual maintenance work