Solid waste method - in the process of production and waste in 2019, enterprise managers must understand the main responsibility

The Ministry of Ecological Environment is about to issue the Law of the People's Republic of China on the Prevention and Control of Solid Waste Pollution of the Environment (Amendment), which has attracted wide attention.
addition to the addition of producer responsibility extension system, waste classification system, etc. , the amendments have also been made to specific penalties, a number of illegal fines increased to 1 million yuan, the cost of enterprise waste production and waste further increased.
In the past, enterprises to deal with solid waste, hazardous waste payment to a third party can, for the waste to go unknown, but at present in China, waste handlers have limited processing capacity, the level of uneven

.
What is even more troubling is that the state can provide a limited number of waste treatment certification institutions, although the local also actively expand waste disposal capacity, but still serious "production" shortage, some enterprises have 3-5 months a year can not find a suitable third party to deal with waste.
and treatment costs are very high, and the revised draft strengthens the main responsibility of producers,
emphasizing that solid waste producers are the primary responsibility for solid waste
.
also proposes an "extended producer responsibility system" to absorb and cure the experience of waste electrical and electronic products management, encourage producers to carry out ecological design, establish a recycling system and promote the recycling of resources,
At the same time, it is further required to produce waste enterprises and resources to use enterprise waste products flow to two-way supervision


the following are specific implementations:
1. Enterprises that produce, utilize and dispose of solid waste fail to disclose information on the generation, utilization and disposal of solid waste in a timely manner in accordance with the relevant provisions of the State;
Before revision:
Penalty Provisions (none)
After revision:
1-10 million yuan fine

amendment:
penalty provisions (none) after the amendment:
respectively, industrial solid waste producers and principals fined 1-10 million yuan
3. do not set up hazardous waste identification marks;
1-100,000 yuan fine
revised:
2-20 million yuan fine
4. Not in accordance with the provisions of the state to develop a hazardous waste management plan;
before revision:
fine provisions (none)
revised:
2-20 million yuan fine
illegal discharge, dumping, disposal of hazardous waste;
Before the amendment:
Penalty Provisions (None)
After the amendment:
10-1 million yuan fine
6. Providing hazardous waste or entrusting it to a unit without a business license to engage in business activities;
Before the revision:
2-20 million yuan fine
After the revision:
10-1 million yuan fine
7. If hazardous waste transfer slips are not completed in accordance with the provisions of the State or hazardous wastes are transferred without authorization; before the
amendment:
2-20 million yuan fine
after revision:
10-1 million yuan fine
8. Mixing hazardous waste into non-hazardous waste storage;
:
1-100,000 yuan fine
after revision:
2-20 million yuan fine
9. Non-safe disposal, mixed collection, storage, transportation, disposal of hazardous wastes of an incompatible nature;
:
1-100,000 yuan fine
after revision:
2-20 million yuan fine
10. No preventive measures and contingency plans for hazardous waste accidents have been formulated.
Before the revision:
1-10 million yuan fine
after the revision:
2-20 million yuan fine
prevention and control of solid waste pollution is a significant, complex process of systematic engineering, solid waste legislation through the law set solid waste "live high-voltage line" who touch who is punished,
clear responsibility of the main direction
adhere to the legal bottom line environmental awareness to remember!