Summary of practical skills for perfect construction of sand-in-water imitation stone paint

As a mainstream product for building exterior wall decoration, the price and construction of sand-in-water colorful imitation stone paint have always been the focus of consumers' attention

Construction steps of sand-in-water colorful imitation stone paint:

Grassroots treatment-----scrape the special leveling putty for colorful imitation stone paint-----scrape the leveling putty again and lay the alkali-resistant mesh cloth-----scrape the surface layer anti-cracking putty--- ----Water spray curing-----Apply Eastman alkali-resistant sealing primer------Apply grid line paint and paste grid paper tape-----Spray or roll Yisi Man Duaihua special same-color primer (middle coat) --------Spray Eastman water-in-water sand colorful imitation stone paint 2 times ---Remove the partition paper tape to reveal the grid paint---- ---Spray or roll coated Eastman special overcoat varnish (the dry film thickness is not less than 30 microns) coating online coatingol.

1.

 In the construction of sand-in-water colorful stone-like paint, the spraying method is horizontal movement, vertical movement or circular spraying, and cannot be superimposed, crossed or mixed in the horizontal and vertical directions

 2.

In addition to the quality of the product itself, the construction process is the key to the final decorative effect of the colorful sand-in-water imitation stone paint

During the spraying process of sand-in-water spray, if the moving speed of the spray gun is too fast, the surface coating of the sand-in-water sand will become thinner, and the coating effect will become thinner, not full, and the effect will not come out; if the moving speed of the spray gun is too slow, The coating will be too thick, causing sagging

3.

During the process of spraying sand in water, the spray gun and the construction wall should be kept vertical or as vertical as possible, because if the spray gun is tilted, the spray belt will deflect, the sand in water will flow to one side, and the other half will be out of paint , Dry and thin, and even streak coating appears.

4.

Generally, the best working distance is between 40cm-90cm for sand-in-water multicolor imitation stone paint spray guns

5.

The trigger is used to control the spraying flow rate of the spray gun.