echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Taber wear gauge test steps and maintenance procedures

    Taber wear gauge test steps and maintenance procedures

    • Last Update: 2022-09-09
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Taber wear-resistant instrument is used to test the wear resistance of leather, plastics and other materials, through the way of rotational grinding, the use of different types of friction wheels on the sample rotation friction to detect the wear resistance of materials, is our company Shanghai Qianshi Precision Electromechanical Technology Co.
    , Ltd.
    independent research and development of test equipment, cost-effective, complete
    after-sales service.

    Applicable standards: QB/T2726-2005, ASTM D4060, ASTM D1175, D1044, DIN53754, 53799, 53109, 52347, ISO5470, GB/T4085
    .

    Test steps: Clamping specimens: 1.
    Place the cut specimen on the test bench
    according to the standard requirements.

    2.
    Keep the specimen flat, tighten the compression nut and gasket, and tighten the specimen fixing ring
    with a hex wrench.

    Clamp the wear wheel and weights: 1.
    Mount the pre-ground standard wear wheel on the inside of the front of the balance arm and tighten the screw cap
    .

    2.
    Clamp the corresponding weight weights or balance weights according to the
    required pressure.

    3.
    According to the corresponding standards for the wear wheel specifications of different materials tested, install the corresponding specifications of the wear wheel
    .

    Maintenance procedures: 1.
    After each use of the instrument, first close the power supply, remove the test sample on the equipment, and then wipe off the dust and stains on the instrument with a clean dry cotton cloth to completely recover the normal state
    before use.

    2.
    The ambient temperature of the instrument should not be too high, and the relative humidity should not be too large
    .

    3.
    When the instrument is not often used, it should be cleaned once irregularly, and the power is carried out irregularly to avoid causing the line to be damp and bad situations
    .

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.