Take you through the working process of high shear emulsifier

The emulsifier is to shear, disperse, and impact
the material through the high-speed rotation of the homogenizing head connected to the engine.

In this way, the material becomes more delicate, prompting the integration
of oil and water.

Widely used in cosmetics, shower gel, and many other cream products to use emulsifiers
.

Sauces, juices, etc.
in the food industry.

Ointments
in the pharmaceutical industry.

Emulsifiers
are used in petrochemicals, paints and coatings, etc.

High shear working process: 1.
Under the centrifugal force generated by the high-speed rotating rotor, the material in the figure is simultaneously sucked from the working chamber
from the upper and lower feeding area of the working head.

2.
Centrifugal force throws the material from the radial direction into the narrow and precise gap between the
fixed and rotor.

At the same time, it is subjected to centrifugal extrusion, impact and other forces, so that the material is initially dispersed and emulsified
.

3.
At the outer end of the high-speed rotating rotor, the linear velocity of at least 15m/s is generated, up to 40m/s, and a strong mechanical and hydraulic shear, liquid layer friction, impact tearing is formed, so that the material is fully dispersed, emulsified, homogenized, broken, and ejected
through the stator groove at the same time.

The emulsifier is to shear, disperse, and impact
the material through the high-speed rotation of the homogenizing head connected to the engine.

In this way, the material becomes more delicate, prompting the integration
of oil and water.

Sauces, juices, etc.

in the food industry.

Ointments
in the pharmaceutical industry.

Emulsifiers
are used in petrochemicals, paints and coatings, etc.

Mixing, agitating, dispersing, homogenizing, emulsifying and grinding applications
in experimental or industrial production processes.

4.
The material is continuously shot out from the radial direction at high speed, changing the flow direction under the resistance of the material itself and the container wall, and at the same time, under the action of the upper and lower axial suction force generated by the rotor area, two strong flipping turbulence flows
are formed.

After several cycles, the material finally completes the dispersion, emulsification and homogenization process
.