Talk about the difference between epoxy self-flat scraping construction and airless spraying

China Paint Online News Information: The traditional construction method of epoxy self-leveling floor is scraping, which is also the preferred construction method in China. Its advantages are simple operation, easy to train, a wide range of applications, the shortcomings are single-person construction, low efficiency. With the application of epoxy self-flowing leveling, there has been a gas-free spray construction method in recent years.airless spray construction safe and efficient, with good coating effect, material savings and other advantages, especially suitable for large-area applications. Epoxy flooring is a high demand, high-quality products, epoxy floor paint a wide variety such as: epoxy thin coating floor, epoxy self-leveling floor, epoxy anti-static flooring, epoxy anti-corrosion flooring, etc., all kinds of high-quality epoxy flooring acceptance standards are as follows: 1, the ambient temperature of 25 degrees C, 2-3 days after construction should reach solid dry, that is, hardness to complete the solidification of about 80%;
2, the surface can not appear sticky phenomenon;
3, bubbles: flat-coated, mortar-type bubble-free, self-leveling allows 1 small bubble / 10 square meters;
4, the surface of the floor should be flat and smooth, gloss should meet the design requirements (high gloss≥90, light ≥70, half-light 50 to 70), flat coating type for light, water-based half-light to no light;
5, orange peel, mortar non-slip surface effect should be obvious.
6, smoothness is good,knife marks, large area interface is basically flat;
7, no coarse impurities, but allows the air to fall on the dust caused by the very small defects;
8, no floating hair flowers, uniform color, large area interface allows for a very un obvious color difference.
。