Talk about the production process of the exhibition counter factory Paint determines the effect

The operation of each display cabinet manufacturing plant is important from ordering to making to shipping installation. First of all, we start from the order process:
generally we
listing cabinet production plant
salesman to take orders down, with the customer to sign a contract, confirm the drawings, and then made a deposit. Then there's the process of ordering the factory. General orders by the factory director or designer or with the single person to place an order, such as they reviewed the material and drawings problems, there may be in the middle of communication with the salesman, where there is a problem, to contact customers. Once it is determined, print two copies of each drawing, one for the carpentry supervisor and one for the paint supervisor. When it's time to ship, print another copy to the installation department.
order process is finished, it is to the counter production link, the first production is started by the carpentry department. At first even if the material, the cabinet needs how much material, open good material, assembly is also convenient. After calculating the material began to produce, according to the drawing structure production, the structure of the counter is good or bad the key to look at carpentry technology. The carpenter got the blanks right and went to the paint department to process them.
is a technical job in terms of paint, the beauty of the cabinet depends on the paint aspect. First make up the atomic ash, polish, then hit the pig's blood ash (may not be needed in the north), then polish, then spray primer (twice), then polish, and finally make the paint. The process is complex, but to deal with potholes, nail eyes and other issues. The front is not handled well, want to do a good job of paint is still a little difficult.
paint is very key words, especially to do two sides, sprayed and waiting to dry, but also in a dust-free environment to work. High environmental requirements, not only to see the paint master oil level, but also to see the master's oil injection technology.
the cabinet paint dried up, it went to the installation department to assemble it. Here workers have to protect the paint from scratches, but also to deal with hygiene problems, after the packaging and then shipped and installed.
the general process is like this, but throughout the process, or according to the construction drawing production, slightly wrong, rework will be very troublesome things.